Redi-Rock™ Reinforced Walls - Modular wall

The BBA approved Redi-Rock™ modular wall system is an ingenious, space saving solution for the retention of earth for a wide range of retaining, force protection, landscaping and flood protection applications. The ‘big block system’ has the appearance of natural stone and is versatile enough to achieve height without compromising on strength. Each one tonne block (1040 series) interlocks with the next and is dry laid, resulting in extremely fast installation times and cost saving.

The modular walling precast products are made from durable, wet-cast concrete. The one-tonne interlocking Redi-Rock™ blocks are big enough that they can be simply stacked on top of each other to construct a gravity wall.

The wall is manufactured using over 25% of PFA materials to provide a sustainable solution for a wide variety of applications. Walls can be dismantled and relocated so if the project changes, the wall can be disassembled and relocated – a sustainable solution with minimal maintenance required.

The modular walling solution has BBA approval, UKCA Approved, from the Highway Authorities Product Approval Scheme (HAPAS) and is British Kitemarked by PAS 68 certification.

For even taller and/or more heavily loaded retaining walls, the Redi-Rock™ Positive Connection (PC) system can be used to construct a mechanically stabilized earth (MSE) wall. However, it is much more than simply large retaining wall blocks. The freestanding blocks have the same great look as the retaining blocks, with texture on two or more sides. These freestanding blocks are perfect for perimeter walls, entrance monuments, or parapet walls.

Accessory products available include steps, benches and capping blocks/coping stones.

Features and benefits:

• Large interlocking blocks that are dry laid and can be built in any weather resulting in very fast construction.
• Standard blocks are delivered ready to use, resulting in little or no waste.
• Redi-Rock™ is manufactured using over 25% of PFA materials to provide a sustainable solution for a wide variety of applications – The ultimate sustainable solution with minimal maintenance required.
• Factory produced quality product available in three natural looking, aesthetically pleasing finishes with built in engineered strength.
• Varied designs are achieved using standard blocks resulting in space saving fast building solutions.
• Durability of wet cast concrete with a 120 year design life.
• Concrete: 40 N/mm² at 28 days.

Design:

1. Top Block: Grooved underside, dished top to accept surfacing.
2. Middle Block: Grooved underside, domed top to accept next course.
3. Bottom Block: Flat underside, domed top to accept next course.

Redi-Rock™ reinforced walling or positive connection system (PC) is used in conjunction with a geogrid has been

rigorously tested and is used when either an increased load or height is required. Due to the massive size of each block, using the system can reduce time and money spent on installation.

This system combines stability with the natural appearance of stone with the established performance of geogrid reinforcement through a simple and highly efficient positive connection with the reinforced block.