Rectangular Box Gutter System - Aluminium Guttering
Verified by manufacturer 7 months ago
4x3 rectangular gutter (100 x 75)
4x3 rectangular gutter (100 x 75)
Warringtonfire
Certificate type
Aluminium box guttering is suitable for various applications including plastic guttering alternatives to industrial gutters.
Application
Guttering is suitable for use in new build and refurbishment, in modern and traditional buildings.
Suitable for a variety of applications including plastic guttering alternatives to industrial gutters. Aluminium Guttering Rectangular Box Gutter System.
Description
Aluminium box guttering is suitable for various applications, including plastic guttering alternatives to industrial gutters.
Features and benefits:
- Includes wind and snow-resistant brackets as standard (a common cause of failure in comparable systems).
- Internal union joints with spacers, prevent over-tightening and subsequent leakage, replacing unreliable and unsightly ‘butt straps’ and unions found on comparable systems.
- Supplied in standard 2.0 mm thickness to BS 2997, but is also readily available in 2.5 mm and 3.0 mm
- Guttermaster systems use 1050A H14 alloys in compliance with BS requirements (softer commercial grades of alloys can be found in competitive systems).
- The RG range is available with a joggle feature as indicated, or plain-ended with a separate internal union.
Snow load test reports are available, consult the manufacturer for details.
General information
Color | Silver Other Beige Black Blue |
Finish | Powder-coated Anodized Textured Metallic Other |
Material | Aluminium |
Shape | Rectangle Square |
Length | 3000 mm Guidance for specification option: Standard section length. Bespoke |
Width | 100 mm 125 mm 150 mm 200 mm Bespoke Manufacturer guidanceNominal sizes. |
Height | 75 mm 100 mm 150 mm Bespoke Manufacturer guidanceNominal sizes. |
Warranty description | Other Manufacturer guidanceFinish warranty available and determined upon applicated based upon geographical location. |
Uniclass | |
CAWS | R10/11 Aluminium gutters R10/311 Aluminium gutters |
Specification data - Aluminium eaves gutters
Form | Pressed.Guidance for specification option: 2 mm aluminium alloy 1050H14A, 2.5 or 3 mm aluminium available where specified. |
Profile | Box.Guidance for specification option: Standard. Box with sloping front.Guidance for specification option: Purpose-made component; consult manufacturer for details. Box with chamfered front.Guidance for specification option: Purpose-made component; consult manufacturer for details. |
Size (nominal width) | 100 mm. |
Thickness or gauge | 2 mm.Guidance for specification option: As standard, to BS 2997. 2.5 mm. |
Finish | Polyester powder-coated to BS 6496.Guidance for specification option: Standard; insert colour requirements below. Anodized.Guidance for specification option: Insert colour requirements below. Heritage textured.Guidance for specification option: Insert colour requirements below. Metallic.Guidance for specification option: Insert colour requirements below. Special.Guidance for specification option: Insert colour requirements below. |
Colour | RAL, colour.Guidance for specification option: Insert requirements (polyester powder coating only). BS 4800, colour.Guidance for specification option: Insert requirements (polyester powder coating only). Syntha Pulvin, colour.Guidance for specification option: Insert requirements (polyester powder coating only). Other.Guidance for specification option: Insert requirements (all finishes). |
Film thickness (minimum) | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Integral accessories | Running outlet.Preformed gutter angle, 90° (external).Preformed gutter angle, 90° (internal).Preformed gutter angle, 135° (internal).Preformed gutter angle, 135° (external).Stop end, left hand.Stop end, right hand.Manufacturer guidanceComponents to match main gutter size where applicable. Brackets and joints specified separately below. For purpose-made components, see Accessories. |
Joints | Joggle feature. Plain ended, with separate internal union joints. |
Brackets | Not required. Fascia brackets with wind and snow restraint. Rafter brackets with wind and snow restraint, side fixing. Rafter brackets with wind and snow restraint, top fixing. Manufacturer guidanceSize to match main gutter size. Other components specified separately; see Integral accessories. For purpose-made components, see Accessories. |
Depth | 75 mm. |
Accessories | None. Lightning clip. Guidance for specification option: Consult manufacturer for details and insert requirements. Raking angle. Guidance for specification option: Consult manufacturer for details and insert requirements. Radius gutter. Guidance for specification option: Consult manufacturer for details and insert requirements. Segmented gutter. Guidance for specification option: Consult manufacturer for details and insert requirements. Manufacturer guidancePurpose-made components. (see Integral accessories for standard options). |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 16 kg CO₂ eq/kg |
Recyclability | Potential 95% + recyclability |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 95 % |
Third party certifications
Warringtonfire
UK Fire Test Results
Literature
Specification Guide - Rectangular Box Gutter
Case studies
Alerton Synagogue
Similar products from Guttermaster Ltd
Cast Aluminium Guttering - Half-Round, Ogee or Moulded No.46
Half Round Gutter System - Aluminium Guttering
Moulded No. 46 Gutter System - Aluminium Guttering