Rada Meynell 15/3 Thermostatic Mixing Valve

A ½" thermostatic mixing valve with integral check valves and strainers, suitable for under-basin installation and providing thermostatic shutdown in less than 2 seconds.

The unit also incorporates tamper proof temperature adjustment.

Operation:

Designed to be installed into the supply pipework and must be used with a separate outlet flow control such as a tap.

Connections:

Inlet and outlet: 15 mm compression fittings.

Pressure:

• Minimum operating pressure: 0.1 bar.

• Maximum static pressure: 10 bar.

• Maximum pressure loss ratio: 10:1 (in favour of either supply).

• Maximum hot water supply temperature: 85°C.

• Maximum cold water supply temperature: 25°C.

Note: Both hot and cold pressures should be nominally equal.

Temperature range:

• Factory pre-set maximum outlet temperature: 42°C.

• Minimum temperature differential between hot inlet and pre-set outlet temperature: 10°C.

• Optimum temperature control range: 35–45°C.

• Maximum hot water temperature: 85°C (for safety reasons it is recommended that the hot water storage temperature is maintained at between 60°C and 65°C in ablutionary applications).

Materials:

Body: DZR brass housed in white plastic casing.