PURe® Parallel Push Window

Application

When used on projects involved in a BREEAM assessment, or within the Code for a Sustainable Built Environment and the Code for Sustainable Homes (which therefore involves the Green Guide to specification) can offer significant benefits. Consult manufacturer for details.

Description

The PURe® window range is a range of aluminium windows which uses an innovative, enhanced thermal barrier manufactured from expanded polyurethane (PUR) allowing ultra-low U-values to be achieved.

The aluminium windows are fully compatible with Senior doors and curtain walling and are available pre-finished in an almost unlimited range of colours and finishes both inside and out. With a generic Green Guide rating of ‘A’ for use in commercial projects and a life expectancy in excess of 40 years, the product is 100% recyclable and has been designed to meet the Passivhaus standard.

The window is constructed using mitred corners, joined with crimped cleats; alignment chevrons assist in clean, accurate mitres. Integral transoms and mullions are scribed around the outer frames and fixed with either screw ports or shear blocks. A proprietary sealant is used on all metal joints in line with good practice.

Opening window frames are designed to be inserted directly into the outer frames using butt hinges.

Weather resistance to BS 5375-1:

  • Air permeability: 600 Pa.
  • Water tightness: 600 Pa.
  • Wind resistance: 2400 Pa.

Features and benefits:

  • Available in an almost unlimited range of colours and finishes both inside and out.
  • Opening window frames are designed to be inserted directly into the outer frames using friction stays.
  • Choice of chamfered or square beads or Mix and Match.
  • High-performance polyurethane thermal barrier giving U-values as low as 0.73 W/m²K when calculated as a commercial CEN standard window.
  • Tested to BS 6375-1,-2 and-3, Annex A.
  • All types security tested to PAS 24:2012.
  • Able to receive double or triple glazing for maximum thermal and acoustic performance (Sizes available: Radius vent: 28–48 mm; Flat faced vent: 28–57 mm).

Applications:

When used on projects involved in a BREEAM assessment, or within the Code for a Sustainable Built Environment and the Code for Sustainable Homes (which therefore involves the Green Guide to specification) can offer significant benefits. Consult manufacturer for details.

General information

Size

Consult manufacturer for details and insert requirements.

Material

All aluminium sections are extruded using Aluminium Alloy 6060 or 6063 T6 to BS EN 755-9:2008 or BS EN 12020-2

Polyamide thermal barriers are manufactured in accordance with PA66 GF25

Gaskets are manufactured in accordance with BS 3734

Uniclass 2015

Pr_30_59_98_02 Aluminium window unitsPrimary

CAWS

L10/25 Aluminium windows

L10/330 Aluminium windows

Specification data - Aluminium window units

Product Reference

PURe® Parallel Push Window

Size

Consult manufacturer for details and insert requirements.

Glazing

-

Type

Double

Triple

Thickness

28–57 mm thickness available, consult the manufacturer for details and insert requirements.

Beads

Chamfered

Square

Mix and match

Insert requirements.

Colour/ Finish

-

Exterior

Anodized, satin

Anodized, polished

Polyester powder coating, RAL

Interior

Anodized, satin

Anodized, polished

Polyester powder coating, RAL

As exterior

Vent

Flat faced vent

Radius vent

Standard product features

Typical sizes (maximum):

1500 x 2400 mm.

Material:

  • All aluminium sections are extruded using Aluminium Alloy 6060 or 6063 T6 to BS EN 755-9:2008 or BS EN 12020-2.
  • Polyamide thermal barriers are manufactured in accordance with PA66 GF25.
  • Gaskets are manufactured in accordance with BS 3734.

Product Options

Colour/ Finish:

A full range of standard RAL colours is available, along with colour match for a bespoke solution. Dual colour, with different colours on the exterior and interior surfaces, is available.

  • Polyester powder coating to BS EN 12206-1:2004. Surface finish at 40 microns standard, or enhanced to 60 microns for marine environments, in accordance with ISO 9001, ISO 14001 and ISO 18001.
  • Anodised finishes are to BS 3897:1991 to a minimum of 25 microns (AA25), supplied in either satin or polished finish in a limited range of colours.

Literature

PURe Systems Brochure 2015

PURe Systems Brochure 2015

Similar products from Senior Architectural Systems Ltd

Ali VU Casement Window

Ali VU Casement Window

PURe Casement Window System [Curtain Wall Placement]

PURe Casement Window System [Curtain Wall Placement]

PURe Casement Window System [Wall Placement]

PURe Casement Window System [Wall Placement]

PURe Tilt/Turn Window System [Curtain Wall Placement]

PURe Tilt/Turn Window System [Curtain Wall Placement]

PURe Tilt/Turn Window System [Wall Placement]

PURe Tilt/Turn Window System [Wall Placement]

PURe® Casement Window

PURe® Casement Window

PURe® Overswing Window

PURe® Overswing Window

SPW 300 Series

SPW 300 Series

SPW 600 Series

SPW 600 Series

SPW600e Casement Window System [Curtain Wall Placement]

SPW600e Casement Window System [Curtain Wall Placement]