Protan Prefabricated System - SE Membrane, Warm Roof Construction

Features:

• The system is suitable for large simple roofs in which 1000 mm wide rolls of membrane would traditionally be installed.

• The prefabricated rolls of membrane enable quick installation, with up to 70% reductions in onsite welding times.

• Suitable for new build and refurbishment applications with flat or pitched roofs.

• Protan SE membrane is manufactured from pliable PVC reinforced with knitted polyester. The PVC contains stabilizers, which provide fire resistance and make the product UV stable and resistant to both high and low temperatures. The membrane remains flexible at low temperatures, during installation and use.

• Protan SE membrane has a unique slip resistant texture.

Durability:

• Accelerated weathering tests and performance in service indicates that Protan SE 1.2 mm should have a life in excess of 40 years.

• SE 1.6/ 1.8 mm membranes may have a longer life expectancy.

Fire Resistance:

– Tests indicate that

• A system comprising 0.7 mm profiled steel decking, 50 mm polyurethane insulation with an aluminium foil facing on the upper side and glass tissue facing to the underside and one layer of Protan SE mechanically fixed will be unrestricted.

• A system comprising 0.7 mm profiled steel decking, 0.21 mm thick vapour control layer, 90 mm foil-faced polyurethane insulation and one layer of Protan SE mechanically fixed can be classified under BS EN 13501-5:2005 as Broof (t4).

• A system comprising 0.7 mm profiled steel decking, a polyethylene vapour control layer, 150 mm foil faced Kingspan TR26 PIR insulation and one layer of Protan SE mechanically fixed can be classified under BS EN 13501-5:2005 as Broof (t4).

• A system comprising an 18 mm plywood deck, a polyethylene vapour control layer, 150 mm foil faced Kingspan TR26 PIR insulation and one layer of Protan SE mechanically fixed can be classified under BS EN 13501-5:2005 as Broof (t4).

Substrates:

• Concrete roof decking.

• Plywood WBP to BS 5268-2 and BS EN 636-3, minimum thickness 18 mm.

• Profiled galvanized steel deck, minimum recommended thickness 0.7 mm to BS EN 10147 Fe E280G Z275.

• Roofing Grade OSB Board to BS EN 300, Grade 3, and minimum thickness 18 mm.

• Profiled Aluminium deck, minimum recommended thickness of 0.9 mm to BS EN 485-1/2/3/4:1995 and 1999-1-4:2007.

Properties of waterproof membrane:

– Thickness: 1.2 mm.

• Weight: 1.4 kg/m².

• Roll length: 12.5 m as standard.

• Roll width: 3960mm.

• Tensile strength (EN 12311-2(A)): >1050 N/50 mm.

• Elongation at break (EN 12311-2(A)): >15%.

• Tear strength (EN 13210-2): 210 N.

• Unique slip resistant texture.

– Thickness: 1.6 mm.

• Weight: 1.8 kg/m².

• Roll length: 12.5 m as standard.

• Roll widths: 3960mm.

• Tensile strength (EN 12311-2(A)): >1110 N/50 mm.

• Elongation at break (EN 12311-2(A)): >15%.

• Tear strength (EN 13210-2): 210 N.

• Unique slip resistant texture.

– Thickness: 1.8 mm.

• Weight: 2.1 kg/m².

• Roll length: 12.5 m as standard.

• Roll widths: 3960mm.

• Tensile strength (EN 12311-2(A)): >1100 N/50 mm.

• Elongation at break (EN 12311-2(A)): >15%.

• Tear strength (EN 13210-2): 210 N.

• Unique slip resistant texture.

Secret-fix strips:

• Factory welded 130 mm wide strips are located in the reverse of 3.96 m wide SE membrane.

• Either four or six strips are located in line with the roll length, with number of strips determined by Protan Technical Services Department.

• Suitable for large, simple roofs in which 1000 mm wide rolls of membrane would traditionally be installed.

• The prefabricated rolls of membrane enable quick installation with up to 70% reduction in onsite welding times.

• Tensile strength (EN 12311-2): >2500 N/50 mm.

• Elongation at break (EN 12311-2): >15%.

• Tear strength (EN 13210-2): 500 N.

Air Vapour Control Layer (recommended):

– Protan PE Air Vapour Control Layer:

• Thickness: 0.2 mm.

• Colour: Blue.

• Water vapour transmission: >78 m (Sd value), to BS EN 1931.

• Installation: Loose lay and overlap all side and end laps by minimum 150 mm and seal with double-sided mastic tape. Tape dimensions; 1.5 mm x 60 mm.

• Insulation must be mechanically fixed.

– Protan Self-Adhesive Air Vapour Control Layer:

• Thickness: 0.6 mm.

• Colour: Black/Foil Top Surface.

• Water vapour transmission: >1,500 m (Sd value), to BS EN 1931.

• Installation: Apply Protan AVCL Primer. Lay membrane and overlap all side laps by 60-80mm and all end laps by at least 150mm. Apply pressure evenly.

• Insulation can be mechanically fixed or adhered.

Protection Layer:

– Protan F2B Protection Fleece:

• Weight: 140 g/m².

• Material: Polypropylene.

• Use: Over timber or plywood decks, smooth or screeded concrete, old single ply membrane or bitumen roofs. (Please contact Protan (UK) Ltd for further guidance.)

– Protan F300M Protection Fleece:

• Weight: 300 g/m².

• Material: Polypropylene.

• Use: over smooth or screeded concrete, old bitumen roofs, concrete. (Please contact Protan (UK) Ltd for further guidance.)

Insulation (recommended):

• ROCKWOOL Hardrock, Multi-Fix, Dual Density (DD), stone mineral wool board. Inclusive system warranty available, consult manufacturer.

• Kingspan polyisocyanurate. Inclusive system warranty available, consult manufacturer.

• EPS.

• XPS.

Application:

The system is suitable for large simple roofs in which 1000 mm wide rolls of membrane would traditionally be installed. Suitable for new build and refurbishment applications with flat or pitched roofs.