Proofex WG
Description

A free-flow epoxy resin grout for use in waterproofing pile-caps, which can also be used when buildings are being constructed on gas-contaminated land.

Proofex WG is a three-component system consisting of base resin, liquid hardener and specially graded inert fillers. It is suitable for thicknesses of 20–100 mm.

Benefits:

  • Non-shrink, ensuring complete surface contact and bond.
  • Fully waterproof and compatible with Proofex membranes.
  • High compressive, tensile and flexural strengths.
  • Fast, convenient installation with rapid strength gain.

General information

Uniclass 2015

Pr_20_31_53_27 Epoxy resin groutsPrimary

CAWS

J30/10 Cold applied damp proofing

J30/130 Cold applied damp proofing . . . . . .

Specification data - Epoxy resin grouts

Product Reference

Proofex WG

Standard product features

Density:

2025 kg/m³.

Compressive strength (BS 6319-2:1983):

  • 6 hours: 36 N/mm².
  • 1 day: 89 N/mm².
  • 3 days: 93 N/mm².
  • 7 days: 100 N/mm².

Tensile strength (BS 6319-7:1985):

7 days: 14 N/mm².

Flexural strength (BS 6319-3:1990):

7 days: 32 N/mm².

Secant modulus (BS 6319-6:1984):

13 kN/mm².

Chemical resistance:

Resistant to oil, grease, fats, most chemicals, mild acids and alkalis, fresh and sea water. Consult Fosroc’s Customer Service Department when exposure to solvents or concentrated chemicals is anticipated.

Literature
Similar products from Fosroc International Limited