ProAqua Shield - Tanking Kit

UltraTile ProAqua Shield provides waterproof protection to backgrounds in commercial environments, wetrooms, domestic bathrooms, kitchens and showers and is suitable for both walls and floors prior to tiling. It is a polymer emulsion-based product for use on internal installations only. It requires only one coat and can be tiled in 90 minutes without the need to prime.

Application:

1. Apply coating to the junctions between wall to floor and wall to wall corners using a paint brush at coverage 1.1 kg/sqm.
2. Bed a strip of membrane tape into the coating while still wet to strengthen and reinforce the junction points (adjoining boards). Tape can also be used to reinforce cracks, pipe entries and screw fixings.
3. When dry (after 30 minutes), apply one uniform coat over the complete wall and floor area including reinforced areas in a continuous layer at a coverage of 1.1 kg/ sqm using a paint brush or roller as previous. Allow 90 minutes drying time before commencing tiling.