NBS Source
List your products
Application

  • Suitable surface types include masonry, fair-faced masonry, plaster, concrete, glass-fibre fabric, woodchip, fleece and embossed wallpapers, dispersion, mineral and silicate paints.
  • With the ECO quality seal, it is perfectly suitable for sensitive areas such as doctor’s practices, offices, nursery schools, shops, hospitals, food trade, schools and residential areas.

Description

Prepair is a pigmented dispersion primer for walls and ceilings surfaces indoors and outdoors. It is odourless, produced without the addition of plasticisers, preservatives or solvents and is free of fogging-active substances.

Features and benefits:

  • The dried paint of Prepair Base/ Primer conforms to DIN EN 71-3 for children’s toys and requirements for saliva and sweat resistance (previously DIN 53160). Therefore, it can safely be applied in children's rooms.
  • When dry, the paint is free of harmful emissions such as toxic gases or gaseous substances which might have an effect on food in the room. Even during short contact between dried paint and food, there is no risk of a transfer of substances.

Applications:

  • Suitable surface types include masonry, fair-faced masonry, plaster, concrete, glass-fibre fabric, woodchip, fleece and embossed wallpapers, dispersion, mineral and silicate paints.
  • With the ECO quality seal, it is perfectly suitable for sensitive areas such as doctor’s practices, offices, nursery schools, shops, hospitals, food trade, schools and residential areas.

General information
Specification data - Primer-undercoats
Product Reference

CLEAN WALL® PREPAIR - Primer

Standard product features

Colour:

White, satin finish. Can be tinted to up 5% (maximum) with commercial tinting and full-tone colours, however, health and environmental properties change when adding tinting products, consult the manufacturer for details.

Technical characteristics:

  • Specific weight: 1.42–1.46 kg/l.
  • Base: Dispersion, mineral
  • pH value: 10.5 – 11.4.
  • sd value: 0.03.
  • EU limit value for the product cat. A/h: 30 g/l (2010) This product contains a maximum of 0.4 g/l VOC.
  • Consumption: 150–200 ml/m², depending on the surface type (approximatel
  • Drying: At a temperature of 23°C and relative air humidity of 60%: Paintable after 12 hours, hard-dried after 2–3 days. With cool and humid air, longer drying periods will be required.
  • Contrast ratio (hiding power) to DIN EN 13300: Corresponds to class 2 with a spreading rate of 7 m²/l.
  • Wet rub resistance to DIN EN 13300: Class 2, corresponds to abrasion resistance according to DIN 53778.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2017 1 2.1
IFC
- 1 2.1
Download now from NBS National BIM Library
Similar products from SMET Building Products Ltd