Premcrete Hydroprufe 3000 - Self-adhesive Waterproof Membrane
Verified by manufacturer 7 months ago
Self-adhesive waterproof membrane.
Application
The release paper should be removed from the first 500 mm before pressing firmly into position to ensure no air pockets are formed. Application of the roll is then completed by continuing to remove the release paper and applying pressure to ensure the membrane is well bonded to the substrate.
Adjacent sheets of membrane should lap by a minimum of 50 mm, this lap is in addition to any over-lap onto the selvedge.
Description
HYDROPRUFE 3000 is a high performance cold applied waterproof membrane, manufactured from tough cross-orientated HDPE film to a layer of rubber adhesive.
The applied film has excellent tear resistance and dimensional stability making it suitable for application to concrete and masonry structures where resistance to ground water is required.
General information
Color | Black |
Material | Polyethylene |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | 25 year |
Uniclass | |
CAWS | J40/190 Self-adhesive bitumen damp proofing/ tanking J40/40 Self-adhesive bitumen membranes |
Product range |
Specification data - Bitumen sheets
Standard | BS 8102: 2009 Grade 3. |
Third-party certification | British Board of Agrément Certificate: 12/4922. |
Form | Cold applied waterproof membrane. |
Material | |
Carrier material | High-density polyethylene (HDPE). |
Bitumen modification | Rubber modified bitumen adhesive. |
Surface finishes | |
Underside | Self-adhesive backing. |
Elongation | 300% (to ASTM D1000). |
Puncture resistance | 230 N (to ASTM E154). |
Adhesion (180° peel) | 4 MPa (to ASTM D1000). |
Water vapour transmission | 0.3 g/m²/day (to ASTM E96). |
Water penetration | Nil (to MOAT 275.1.4). |
Strength | 5 MPa (membrane, to ASTM D1000). |
Literature
Hydroprufe 3000 TDS