PRB ALG Lightweight Monocouche Render
Verified by manufacturer 5 days ago
CS III Compressive Strength - Snow White Colour
CS III Compressive Strength - Snow White Colour
BBA Agrément Certificate
Certificate type
Lightweight Fine-Grain Single Coat Render
Application
Suitable for use on a range of concrete blocks:
- 3.6–7.3 N/mm² ultra-lightweight aggregate concrete blocks with a dry density of <950 kg/m³.
- 3.6–7.3 N/mm² lightweight aggregate concrete blocks with a dry density of 950–1500 kg/m³.
- 7.5 N/mm² dense aggregate concrete blocks with a dry density of 1500 kg/m³.
- Concrete*.
- Brickwork*.
- Clay insulating blocks*.
- Existing sound renders*.
- Lightweight aircrete concrete blockwork* of a density ≥ 400 kg/m³.
*It is recommended these substrates receive a suction control coat of PRB ACCROFIX PATE to provide an even substrate. If unsure please contact the manufacturer.
Applied in one layer (spray machine) or two layers (spray machine or hand) enhanced with embedded PRB ORANGE MESH or PRB AVE MESH.
For enhanced surface protection use the PRB HYDROFUGE.
For application guidance and additional technical information, please refer to the technical data sheet or contact the manufacturers technical team directly.
Description
PRB ALG GRAIN FIN is a weatherproof, breathable and decorative render for external and internal masonry walls.
BBA certified at 12 mm thick decorative through coloured monocouche render available in a wide range of colours. This single coat weatherproof render allows the substrate to breathe whilst giving a fantastic long lasting finish. Suitable for low strength masonry substrates, it can be applied by hand or machine, with a variety of finishes such as scraped, roughcast and floated smooth finishes, note that these smooth application techniques which are hand finished will tend to leave a variable surface appearance which is part of the appeal of these types of finishes.
Features and benefits:
- Weatherproof, breathable and decorative through colour render for external and internal masonry walls.
- Suitable for all types of finish, fine scraped, floated, roughcast, rustic and spray textured.
- Its specific formulation makes it especially suitable for low strength masonry e.g. lightweight blockwork.
- Also available in snow white colour.
General information
Color | Beige Black Blue Cream Green |
Finish | Scraped Floated Smooth Roughcast |
Material | Render |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Ten year |
Uniclass | |
CAWS | M22/120 Sprayed M20/19 Proprietary cement gauged render M20/160 Proprietary cement gauged render |
Specification data - Cementitious renders
Components | White cement, natural hydraulic lime, calcic lime, fillers, sand and quarts aggregates, water retention agents, setting regulators, integral waterproofing, light stable mineral pigments. |
Colour | Snow White. |
Compression strength | CS III, 3.5–7.5 N/mm². |
Water permeability | μ < 20. |
ThermalConductivity | 0.54 W/m²·K. |
Water absorption | W2, C ≤ 0.20 kg/m²·√min. |
Reaction to fire | A1 (non-combustible). |
Density | 1000–1400 kg/m³. |
Modulus of elasticity | <5000 MPa. |
BendingStrength | <2 MPa. |
Sustainability data
Material | Render |
Product certifications
BBA Agrément Certificate
ALG BBA Certificate
Literature
PRB Monocouche Colour Chart
PRB Systems Product Guide
CPD materials
Choosing a Render System
Case studies
PRB Monocouche Render over Painted Render Case Study
PRB Case Study - Costa Coffee
Similar products from PRB Systems Ltd
PRB Oze Semi Lightweight Monocouche Render
PRB Superbrut Semi Lightweight Monocouche Render