PPG STEELGUARD 651 is a one-component, thin-film, waterborne intumescent coating for fire protection of structural steelwork
Cellulosic fire protection for structural steelwork.
One-component, thin-film, waterborne intumescent coating for fire protection of structural steelwork.
Features and benefits:
Waterborne intumescent provides up to 120 minutes protection from cellulosic fires.
On-site application, Up to 700 µm (28.0 mils) DFT in a single coat.
Suitable for C1, C2 and C3 internal environments (ISO 12944); for dry internal (C1) environments no topcoat is required.
Tested and assessed to EN 13381-8, BS 476-20 and -21 and GB 14907.
CE marked product, ETA 15/0524.
Assessed to ETAG 018-2 for durability classifications Z1, Z2 and Y.
Waterborne intumescent coating.
M60/18 Special coating
M61/110 On-site coating to primed steel
M61/115 On-site coating to galvanized steel
M61/120 On-site coating to existing steel
M61/140 On-site overcoating to existing steel
M61/150 Off-site coating to unprimed steel
M61/160 Off-site coating to primed steel
M61/170 Off-site coating to galvanized steel
PPG Steelguard 651
Tested and assessed to EN 13381-8, BS 476-20 and -21 and GB 14907
The following PPG and Johnstone’s Trade topcoats are approved for use over PPG STEELGUARD™ 651 at an applied DFT of 50 μm for internal environments only. Johnstone’s Trade Steel and Cladding Semi-Gloss topcoat. Johnstone’s Trade Aqua Waterbased Satin or Gloss. PPG AQUACOVER 45