NBS Source
List your products

product no longer available -

Application

Cellulosic fire protection for structural steelwork.

Description

One-component, thin-film, waterborne intumescent coating for fire protection of structural steelwork.

Features and benefits:

  • Waterborne intumescent provides up to 120 minutes protection from cellulosic fires.
  • On-site application, Up to 700 µm (28.0 mils) DFT in a single coat.
  • Suitable for C1, C2 and C3 internal environments (ISO 12944); for dry internal (C1) environments no topcoat is required.
  • Tested and assessed to EN 13381-8, BS 476-20 and -21 and GB 14907.
  • CE marked product, ETA 15/0524.
  • Assessed to ETAG 018-2 for durability classifications Z1, Z2 and Y.

Application:

Cellulosic fire protection for structural steelwork.

General information
Finish

Matt

Features

Waterborne intumescent provides up to 120 minutes protection from cellulosic fires

On-site application, Up to 700 µm (28.0 mils) DFT in a single coat

Suitable for C1, C2 and C3 internal environments (ISO 12944); for dry internal (C1) environments no topcoat is required

Tested and assessed to EN 13381-8, BS 476-20 and -21 and GB 14907

CE marked product, ETA 15/0524

Assessed to ETAG 018-2 for durability classifications Z1, Z2 and Y

Material

Waterborne intumescent coating

Size

5 and 20 L

Uniclass 2015 Intumescent protective coatings (Pr_35_31_68_43)
Specification data
Product Reference

PPG Steelguard 651

Standard

Tested and assessed to EN 13381-8, BS 476-20 and -21 and GB 14907

Formulation

Water-borne

Volume solids

70%

Compatibility

The following PPG and Johnstone’s Trade topcoats are approved for use over PPG STEELGUARD™ 651 at an applied DFT of 50 μm for internal environments only. Johnstone’s Trade Steel and Cladding Semi-Gloss topcoat. Johnstone’s Trade Aqua Waterbased Satin or Gloss. PPG AQUACOVER 45

Standard product features

Colour:

White.

Features:

  • Waterborne intumescent provides up to 120 minutes protection from cellulosic fires.
  • On-site application, Up to 700 µm (28.0 mils) DFT in a single coat.
  • Suitable for C1, C2 and C3 internal environments (ISO 12944); for dry internal (C1) environments no topcoat is required.
  • Tested and assessed to EN 13381-8, BS 476-20 and -21 and GB 14907.
  • CE marked product, ETA 15/0524.
  • Assessed to ETAG 018-2 for durability classifications Z1, Z2 and Y.

Finish:

Matt.

Material:

Waterborne intumescent coating.

Size:

5 and 20 L.

Similar products from PPG Protective Coatings