Compare

Power Grab 'n' Bond - Tribrid Polymer Construction Adhesive - Heavy duty, high grab adhesive solution

Name: Power Grab 'n' Bond - Tribrid Polymer Construction Adhesive - Heavy duty, high grab adhesive solution
Brand: C-TEC
SKU: 6Np7yp9PfX3LhaiNjpHzd1

Verified by manufacturer 15 days ago

C-TEC

Third party certifications:

ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
Made in Britain
Certificate type
ISO 45001 Health and Safety Management
Certificate type
EPD
Certificate type
VOC Content test Certificate
Certificate type

PGB is a high strength, solvent-free construction adhesive for vertical bonding applications without fixings. It has an exceptional initial grab followed by structural bonds of 22Kg/cm² when cured.

Jump to:

02830834892 Website

Application

Power Grab 'n' Bond will adhere well to:

All metals (including lead, copper, zinc, aluminium, stainless steel).
Concrete.
Most stones.
Brick.
All woods.
Gypsum board.
Glass/mirrors.
Polycarbonate.
Tiles/ceramics.
Plastics (excluding PP, PE and PTFE).
MDF.
Polystyrene.
Fibreglass.

For applications where initial high grab is not required users may consider CT1 due the greater variety of colour options available including White, Grey, Black, Anthracite, Brown, Oak and Beige.

For internal applications CT1 clear and silver are also options.

Apply in vertical strips.
Application temperature range: 5°C to 35°C.
Service temperature range: -40°C to 90°C.
Apply on dry surfaces.
Suitable for use on mirror installations (not suitable for PP backed mirrors).
For application advice on sandstone-type materials contact the manufacturer's technical department. Porous stone should be sealed with a good quality PVA solution.
For application advice on powder-coated substrates, contact the powder-coating manufacturer to request if any surface preparation is required i.e. priming before applying adhesives.

DIRECTION FOR USE:

Cut the tube at the nose above the threaded area and attach the nozzle to the top of the cartridge.
Insert the cartridge into a heavy duty chalking gun.
All surfaces should be clean and dry.
Porous stone should be pre-sealed with a good quality PVA solution.
It is advisable that all metal applications should be cleaned and de-greased with C-Tec Multisolve.
Express the adhesive from the cartridge with the "v" in the nozzle facing up.
Apply a minimum 200mm of a 10mm diameter bead per kilogram weight on heavy vertical bonding.
The bead of adhesive should be applied in continuous vertical lines.
After applying the bead of Power Grab 'n' Bond on the surface allow it to rest for approx 5 minutes to start activating before pressing the two surfaces together.

Please Note: While PGB is as strong as a mechanical fix they are required by law for tile and stone installations above 3m in height.

This supersedes everything else but can be used as secondary rather than primary fixings in addition to the adhesive fixing.

Description

Developed by C-Tec, the Manufacturers of CT1, Power Grab ‘n’ Bond is a solvent-free, heavy duty, high grab, high strength construction adhesive for vertical bonding such as cladding, signage and panel installations.

With C-Tec's unique TRIBRID® Technology it has unique high initial grab adhesion on virtually any material in most applications without the need for mechanical fixings.

As a universal high grab, high tensile strength adhesive Power Grab 'n' Bond offers these Features and Benefits:

Replaces mechanical fixings.
Reduces labour time and installation cost by up to 50%.
Phenomenal heavy duty bonding.
High initial grab:
Horizontal Bonding (immediate) 100g/cm².
Vertical Bonding (immediate) 20g/cm².
High tensile strength when cured - 22kg/cm².
Fast curing in 24 hours.
Highly elastic - Remains flexible and resists vibrations.
No shrinking or cracking.
Power Grab ‘n’ Bond bonds to most surfaces and does not attack synthetic material.
Good chemical resistance to water, seawater, aliphatic solvents, oils, greases, and diluted organic acids.
Moderate chemical resistance to esters, ketones and aromatics.
Solvent and isocyanate free.
Low Modulus.
Neutral Cure.
Use internally or externally.
Odourless

General information

Color	Black
Finish	Matt
Material	Polymer
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	Bespoke
Warranty description	20 year

Uniclass	Pr_20_31_02_52 Modified silane (MS) polymer adhesivesPrimary
CAWS	K21/111 Wood floating floor M42/120 Mosaic parquet panel flooring M42/110 Wood block flooring K21/140 Battened wood laminate flooring K21/120 Battened wood flooring M42/10 Wood flooring K21/10 Wood laminate flooring K21/115 Wood laminate flooring K21/110 Wood flooring M40/5 Tiling to M40/110 Tiling to K10/45 Wall lining system (adhesive) K10/185 Wall lining system (adhesive) N10/80 Sealant N13/68 Sealant for pointing N13/580 Sealant for pointing N10/460 Sealant

Specification data - Modified silane (MS) polymer adhesives

Form	Gun grade.
Colour	Black.
Paintability	Paintable with all common water-based paints (not suitable with alkyd paints). Must be fully cured before painting. Manufacturer guidance For best results prior testing is recommended.
Execution	CT1 is applied by expressing it from a cartridge using a suitable heavy duty caulking gun.

Density	1569 kg/m³.
Curing	2–3 mm @24 hours.
Hardness (shore A)	To DIN 53505, 60°.

Sustainability data

Contains Red List materials	No
Country of material origin	United Kingdom
Country of product manufacture	United Kingdom
Material	Polymer
Recyclability	Cartridge is recyclable
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %