NBS Source
List your products
Application

For internal walls and ceilings. Suitable for high absorbent or non-absorbent substrates. The composition allows the product to be applied as a direct finish coat onto smooth surfaces.

The manufacturer recommends the use of Causprim HB on concrete and smooth/ non-absorbent substrates and Causprim AS on highly absorbent substrates prior to the application of Planospray S3 - Airless Finish Plaster. Consult manufacturer for further information.

Description

Factory produced finishing plaster designed for airless piston pump machine application, and produced to DIN EN 15824. It is recommended for use over plasterboards, composite boards or fair-faced concrete surfaces in a two-coat application, onto taped and jointed dry lining systems or as a finishing coat.

Features and benefits:

  • Ready to use - no mixing required.
  • Durable, spray applied plaster.
  • Easy to level with minimal need for sanding.
  • Smooth consistency.
  • Provides a smooth, flat finish onto walls and ceilings.
  • Suitable for applications of 0.5–3 mm thickness.
  • Can be applied using all suitable airless piston pump machines.
  • Tested to EN 15824.
  • Manufactured in accordance with ISO 9001 and 14001, Quality and Environmental Management systems, and OHSAS 18001, Occupational Health and Safety Management.
  • CE marked.

Applications:

For internal walls and ceilings. Suitable for high absorbent or non-absorbent substrates. The composition allows the product to be applied as a direct finish coat onto smooth surfaces.

The manufacturer recommends the use of Causprim HB on concrete and smooth/ non-absorbent substrates and Causprim AS on highly absorbent substrates prior to the application of Planospray S3 - Airless Finish Plaster. Consult manufacturer for further information.

General information
Specification data - Finish plasters
Product Reference

Planospray S3 - Airless Finish Plaster

Standard product features

Technical characteristics:

  • Application temperature: 5–35°C, and must remain free of frost.
  • Drying time: 12–24 hours (depending on ambient conditions).
  • Dry hardened density: 1.6 kg/dm³ (approximately).
  • Yield: 1.6 kg/m² per 1 mm thickness (approximately).
  • Maximum thickness: 3 mm.
  • Adhesion: ≥0.3 N/mm².
  • Reaction to fire: B s1,d0.

Similar products from SMET Building Products Ltd