NBS Source
I'm a manufacturer
NBS Source

Application

Hot melt monolithic waterproofing for blue roof systems.

Description

PermaTEC Hot Melt Monolithic Waterproofing Systems include PermaTEC EcoWRAP waterproofing compounds, that is specially formulated combinations of refined bitumen, synthetic rubbers, fillers and other additives, which are hot-applied in conjunction with carefully selected reinforcement/detailing fabrics and protection layers to give the ultimate waterproofing performance.

Features and benefits:

  • Hot applied system.
  • Suitable for zero fall roof decks.
  • BBA Certified No. 03/4009.
  • Durable – lasts the design life of the building.
  • Nominal membrane thickness of 6 mm.
  • Tough and resistant to impact damage.
  • Excellent low temperature flexibility.
  • High bond strength to substrate - High tensile strength.
  • Homogenous and seamless.
  • Seamless application and rapid setting – resistant to rain, snow and frost immediately after application.
  • Virtually no packaging to be disposed of (zero wrapper waste).

General information

Color

Black

Finish

Other

Guidance for specification option:

20—40 Round Washed Ballast.

Material

Bitumen

Rubber

Polystyrene

Polypropylene

Polymer

Shape

Other

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

25 year

Guidance for specification option:

Up to 25 years dependent on project size and details.

Uniclass

Ss_30_40_30_07 Blue roof systemsPrimary

CAWS

Q37/150 Blue roofs

SKU Code

24110080

Specification data - Blue roof systems

Classification data

System performance

Waterproofing.

Preparation

-

Horizontal work

IKO Permatec primer.

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 246025000.
  • Appearance: Liquid.
  • Colour: Red.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 4 m²/Litre.
  • Drying Time: Typically 1 Hour.

IKO Permatec high penetration primer.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 24600025.
  • Appearance: Liquid.
  • Colour: Black.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 6—8 m²/Litre.
  • Drying Time: Typically 4 Hours.

Skirtings and vertical work

IKO Permatec primer.

Guidance for specification option:

IKO Permatec Polymer Primer is synthetic rubber based primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 246025000.
  • Appearance: Liquid.
  • Colour: Red.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 4 m²/Litre.
  • Drying Time: Typically 1 Hour.

IKO Permatec high penetration primer.

Guidance for specification option:

IKO Permatec High Penetration Primer is bituminous primer for use on concrete and other similar substrates prior to the installation of IKO Permatec Hot Melt Waterproofing System.

  • Code: 24600025.
  • Appearance: Liquid.
  • Colour: Black.
  • Size: 25 Litres.
  • Weight: 25 kg.
  • Use: Primer.
  • Application Rates: Up to 6—8 m²/Litre.
  • Drying Time: Typically 4 Hours.

Insulation

-

Type

IKO enertherm XPS rigid extruded polystyrene (XPS) insulation.

Guidance for specification option:

IKO enertherm XPS is a lightweight, lap joined board with high compressive strength and performance.

  • Available in thickness 50—245 mm.
  • Durability: Continuous service temperature limit is up to +70º C.
  • Water Vapour Resistance: 625 MNs/g.m when tested in accordance with BS EN 12086.
  • Moisture Absorption: 0.6% by volume when tested in accordance with EN 12087.
  • Nominal Density: 32 kg/m³.
  • Loose laid.

Overlay

-

Type

EGR Cloudlayer.

Carrier membrane

-

Type

Deck.

Guidance for specification option:

Supplied by others.

Waterproofing

-

Type

PermaTec Ecowrap.

Guidance for specification option:

A hot applied specially formulated combination of refined bitumen, synthetic rubbers, fillers and other additives.

  • Code: 24110080.
  • Product Colour: Black.
  • Product Type: Hot Melt.
  • Applied on primed deck with Flash R reinforment.

Attachment

Hot-applied.

Protection layer

Filter fleece.

Guidance for specification option:

Nonwoven geotextile manufactured from 100% virgin polypropylene high tenacity fibres, needle-punched and heat treated.

Attenuation layer

EGR EcoVoid 50.

Guidance for specification option:

Load Bearing Blue Roof Attenuation Layer. Three times more permeable than stone sub-bases. Lightweight, strong structure designed to support heavy traffic loading – including HA.

  • Compressive Strength (ASTM D1621): 125 T/m².
  • Weight (Empty): 3.5 Kg/m².
  • Flow Rate per unit width (ASTM D1621): 180 L/min.
  • Surface Area: 96% Void.
  • Long-term Unconfined Creep Test: 42 day deadload 500 kN/m².
  • No displacement: No further creep.

Drainage layer

EGR H2O Flow 6.

Guidance for specification option:

6 mm HDPE cuspated drainage board with a geotextile filter/separator bonded to a single side.

  • Roll length: 100 m.
  • Roll width: 0.97 m.
  • Roll weight: 115 kg.
  • Compressive strength: to EN ISO 25619-2, 800 kPa.
  • Tensile strength (MD/CMD): to EN ISO 10319, 12 kN/m.
  • Static puncture (CBR): to EN ISO 12236, 1.7 kN.

Roof surfaces

50 mm concrete paving.

Guidance for specification option:

On supports.

System accessories

Guidance for specification option:

Consult manufacturer and insert requirements.

Water control layer

IKO enertherm water control layer.

Guidance for specification option:

IKO enertherm WCL is used as a Water Flow reducing Layer between enertherm XPS insulation and the roof ballast layer in inverted roofs, including green and blue roof applications.

  • Code: 30400001.
  • Length: 100 m.
  • Width: 1.5 m.
  • Area per roll: 120 m².
  • Loose laid.

Sustainability data

Country of material origin

United Kingdom

Guidance for specification option:

Raw materials are from multiple countries, however, Permatec Hot Melt is UK manufactured.

Material

Bitumen
Rubber
Polystyrene
Polypropylene
Polymer

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

45 %

Guidance for specification option:

PermaTEC EcoWRAP.

© 2025 Hubexo North UK Ltd. All rights reserved.