NBS Source
Perimeter Barriers - Galvanised
Compare variants

Application

Suitable to secure site perimeters and provide a permanent obstacle to vehicle access.

Description

Perimeter Barriers are designed to help secure site perimeters and provide a permanent obstacle to vehicle access, to mark boundaries, define trolley parks and protect vulnerable door entrances and exits.

Suited to sites where aesthetics and security are equally important, perimeter barriers are commonly found outside car showrooms acting as protection for the cars on the forecourt

without impeding a customer’s view of the vehicles.


Features and benefits:

  • Available in a variety of heights and widths, available as concrete in, bolt down or removable for occasional access.
  • Available as galvanized as standard. Stainless steel, galvanized and colour coated available extra.
  • Tube diameters 48 mm, 60 mm, 76 mm and 90 mm available.
  • Flanged for bolting down onto a suitable concrete surface.
  •  Concrete in, 300 mm below ground.


Installation:

  • Each barrier requires bolting down to a suitable concrete surface (not less than 150 mm deep) by means of six M12 bolts.
  • Each leg of the barrier requires a hole of approximately 400 mm³ and then concreted in for installation.

General information

Height

500 mm

750 mm

1000 mm

Width

500 mm

750 mm

1000 mm

1500 mm

2000 mm

Finish

Galvanized

Coated

Coated colours available. Consult manufacturer and insert requirements.

Material

Steel

Size

500 x 500 mm

Height (above ground) x overall width.

500 x 750 mm

500 x 1000 mm

500 x 1500 mm

500 x 2000 mm

Show more

WarrantyDescription

One year

This product is guaranteed for 12 months (if installed and used correctly).

Uniclass

Pr_20_85_06_11 Carbon steel hoopsPrimary

CAWS

Q50/31 Bollards

Q50/190 Bollards

Product range

Vehicle Access Control

Specification data - Carbon steel hoops Enhanced data

Standard

To ISO 9001, ISO 14001 and OHSAS 18001.

Form

Bolt down.

Dimensions

-

Width

Overall width.

500 mm.

Height

Above ground.

500 mm.

Hoops

-

Size and profile

Tube diameter.

48 mm.

Finishes

-

Applied finish

Galvanized.

Colour coated.

Consult manufacturer and insert requirements. 

Accessories

Not required.

M12 Expanding Anchor bolts - 6 required per barrier.

Environmental information

Country of product manufacture

United Kingdom

Similar products from AUTOPA Limited

ACP 3

ACP 3

ACP4

ACP4

ACP5

ACP5

APC 1

APC 1

APC 11

APC 11

APC 2

APC 2

APC 21

APC 21

Corner Protection Hoop - CPH

Corner Protection Hoop - CPH

Corner Protection Hoop - CPH2

Corner Protection Hoop - CPH2

Corner Protection Hoop - CPH60

Corner Protection Hoop - CPH60