Pendock CH Plywood Casing Systems

Description

CH enclosures are primarily designed for covering and protecting larger diameter pipework, including heating services, soil and vent pipework, rainwater pipes, heat recovery ducting, etc. which are located in mid-wall applications, vertically or horizontally.

Enclosures are supplied either as pre-finished components fitted with assembly joints to facilitate site installation or, where appropriate, as single units.

The enclosures are available to individual size requirements, based on a pair of angle casings (MX range) with an additional flat front section and/ or additional flat side sections. A range of factory-assembled joints are available (J8, J2, J3, J4 and J5).

All profiles are 90° angles, with radiused corners. Internal radius is 21.5 mm.

General information

Size

Insert requirements.

Uniclass 2015

Pr_35_90_43_66 Preformed casingsPrimary

CAWS

P20/170 Proprietary

P20/30 Proprietary

Specification data - Preformed casings

Product Reference

Pendock CH Plywood Casing Systems

Size

Insert requirements.

Finish/ Colour

Laminate

No visible joints.

Laminate veneer

No visible joints.

White melamine

Durable, with a visible plastic joint in the face.

Accessories

None

Aluminium extrusion and decorative insert (top hat), ref: J3

Factory fitted edge shadow gaps

Black finish for use with black screws, to provide discreet fixing location and material for scribing.

Plastic H joint

To join lengths together where over 3000 mm long.

Sealed laminate joint, ref: J4

Product Options

Size:

  • Length: 2500 or 3000 mm. Greater lengths can be achieved using an inner collar to link two sections.
  • Leg size (minimum): 65 mm.
  • Width (minimum): 125 mm.

Fixing:

- Standard:

  • Location: Face fixed to softwood battens using manufacturer's fixings.
  • Type: Black screws. Zinc screws with decorative caps and collars.
  • Position: 50 mm from each end and equally spaced along the profile at approximately 600 mm centres. Provide extra fixings where necessary to uneven walls.

- For edge shadow gap components:

  • Edge shadow gap fixing type: Black screws.
  • Position: In black recessed section, positioned 50 mm from each end and equally spaced along the profile at approximately 600 mm centres.

Similar products from Pendock

GRG Column Casings

GRP Casings

HVAC Casings

Metal Column Casing Systems

Metal Pipe Boxing

MXP PVC-U Casing Systems

Pendock CL Column Casing Systems

Pendock CL Column Casing Systems

Pendock MX Plywood Casing Systems

Pendock MX Plywood Casing Systems

Pendock Radiator Guards

Pendock Radiator Guards

SQ Column Casing Systems