Verified by manufacturer 4 months ago
Oscar Elite 27 mm
QA Certificate
Certificate type
M1 emission classification
Certificate type
Fire Safety Certification
Certificate type
A decorative, highly sound-absorbent finish that appears as smooth as regular plaster.
Acoustic plaster for use in offices, hotels, receptions, luxury homes, restaurants and high specification apartments and houses where the designers' desire for hard flat surfaces can lead to noise reverberation problems.
Acoustic plasters are not suitable for walls below 2 m from the floor.
3-4 mm base coat applied to base board.
Spray and trowel application by Oscar Acoustics trained in-house teams.
An exceptionally smooth, flat acoustic plaster finish with the appearance of conventional plaster.
27 mm-thick decorative, highly sound-absorbent ceiling and wall covering with either a stucco or plaster smooth finish, installed by Oscar Acoustic Elite teams.
Oscar Elite acoustic plaster can be applied directly onto plasterboard, smooth concrete, steel sheet and most other surfaces and is suitable for flat, domed and vaulted soffits.
An excellent alternative to acoustic panel ceilings without design compromise.
Features and benefits:
Fire rating:
A2-s1, d0 and Class 0 to BS 476 - significantly betters the requirements of the new Approved Document B providing little to no smoke and absolutely no droplets, assisting in the safe escape of occupants.
Emissions:
M1 emission class certified for building materials (best class) and CDPH compliant.
Environmental standards:
Environmental Product Declaration in accordance with ISO 14025 - EN 15804. Living Building Challenge compliant.
Recycled content:
Glasswool: 75%
Embodied carbon:
Can effectively lower the carbon footprint of a building project by sequestering rich stores of carbon for the life of the structure or application
Flangeless fittings:
90% of flangeless fittings do not work properly with any acoustic finish. If you are specifying a flangeless fitting, please contact Oscar Acoustics for advice.
Sound absorption:
Acoustic testing has been carried out against concrete. Substrates likely to provide increased performance include plasterboard with the use of an air gap behind, rib deck or profiled metal sheet. Please contact Oscar Acoustics’ technical department for free design assistance.
Materials:
Combination of base board, base and top coats.
Color | White Other Guidance for specification option: Various colours are available. |
Finish | Smooth Manufacturer guidanceSmooth. Stucco. |
Material | Manufacturer guidancePlaster |
Uniclass | |
CAWS | M22/120 Sprayed |
Product range |
System performance | Reaction to fire to BS EN 13501-1, A2-s1,d0 and Class 0 to BS 476.Guidance for specification option: Significantly betters the requirements of the new Approved Document B providing little to no smoke and absolutely no droplets, assisting in the safe escape of occupants. |
Preparation | In accordance with OEL3 Oscar pre-start check list. |
Initial coats | 3–4 mm base coat applied to base board. |
Coating | |
Insulant | High density 20 mm-thick acoustically absorbent base board bonded with adhesive to substrate. |
Protective membrane | 1–2 mm finish coat. |
Movement joints | |
Form with | Stop bead.Guidance for specification option: (Only required when passing over existing movement joints). |
Accessories | None.'F trim' natural finish aluminium bespoke stop bead.'F trim' white PVC-U bespoke stop bead.Access hatch.Oscar Evo-Blade razor edge trim.Pattress.Recessed light haloes (flanged fitting only). |
Thickness | 27 mm. |
Colour | White. Guidance for specification option: Standard. Special order. Guidance for specification option: Almost any colour achievable. |
Sound absorption coefficient | To BS EN ISO 354 at 125 Hz: 0.10, at 250 Hz: 0.50, at 500 Hz: 0.85, at 1 kHz: 0.85, at 2 kHz: 27 mm: 0.80, at 4 kHz: 0.80. |
Noise reduction coefficient | 0.80. |
Weighted sound absorption coefficient | 0.80 αw. |
Texture |
Guidance for specification option: Trowelled and sanded to a smooth plaster finish. Stucco, Oscar Elite S. |
IndoorEnvironment | M1 emission class certified for building materials (best class) and CDPH compliant. |
Environmental | Environmental Product Declaration in accordance with ISO 14025 - EN 15804. Living Building Challenge compliant. |
Contains Red List materials | No |
Country of material origin | Europe |
Country of product manufacture | Europe |
Material | Manufacturer guidancePlaster |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | kg CO₂ eq/kg Self declared Guidance for specification option: Can effectively lower the carbon footprint of a building project by sequestering rich stores of carbon for the life of the structure or application. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 75 % Guidance for specification option: Glasswool. |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
IFC2X3 | 2 | |
Revit 2016 | 3 |