This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more
Norcros Wall and Floor Tile Grout Verified by manufacturer over a year ago
Verified by manufacturer over a year ago
A tiling grout suitable for joints 2–12 mm thick.
Application
Suitable for use with ceramic, stone, vitrified tile and mosaic wall and floor tiles. The material is also suitable for use in pools.
Description
Wall and Floor Grout is a water and weather resistant grouting material for internal and external tile joints up to 12 mm wide, in ceramic, stone, vitrified tile and mosaic wall and floor tiles. The material is also suitable for use in pools.
Features and benefits:
- The performance of Wall and Floor Tile Grout can be improved with the addition of Norcros Adiflex where reduced water permeability is a requirement. The grout is water resistant but not impervious to the passage of water.
- In areas of potential water ingress, preparation of the surface with Norcross Water Seal should be considered. Where an impervious joint is required Norcros Super Epoxy Grout should be used.
- Conforms to classification BS EN 13888 CG1.
General information
Uniclass | |
CAWS | M40/10 Natural stone covering to M40/110 Tiling to M40/115 Natural stone covering to M40/120 Mosaic to M40/5 Tiling to |
Specification data - Polyester resin grouts
Application temperature range | 5°C to 25°C. |
Drying timeat 20°C. | Primer coat 1: Approx. 2 hours. Primer coat 2: Approx. 1 hour. Gritted primer: Approx. 1 hour. |
Coverage | Approx. 25m2 per 15kg kit. |
Application method | Consult manufacturer. |
Storage | Store in dry internal conditions away from direct sunlight between 5°C to 25°C. The product has a 12 month shelf life from date of manufacture. |
Similar products from Norcros Adhesives, trading division of Norcros Group (Holdings)
Norcros Wall Tile Grout
Stop Mould Flexible Wall Grout