Nitoflor PAFS (System 1)
Verified by manufacturer 4 months ago
Fast cure, non-taint, low odour, polyaspartic based floor coating for indoor environments.
Application
- For the rapid and permanent coating of internal and external floors, balconies, and walkways.
- For both internal and external use.
Description
The Nitoflor PAFS System 1 is a two-component, fast cure, low odour, polyaspartic based high build floor coating system for indoor environments.
Features and benefits:
- Low odour.
- Provides a trafficable, waterproof, and durable surface on concrete and cementitious substrates.
- FeRFA Type 3 high build coating system.
- Designed for fast application where down-time must be kept to a minimum.
- The addition of Nitoflor Coarse Anti Slip Grains can be considered if slip resistant finish is required.
- Easy to apply by squeegee, brush, or roller.
- Low temperature cure.
- Complies with the requirements of BS EN 1504-2 and BS EN 13813.
- Forms part of Fosroc’s Rapid Return to Service (RR2S) offer.
System components:
Nitoflor PAFS (System 1) is a two/ three coat application comprising of:
- Nitoflor PAFS Primer.
- Nitoflor PAFS Topcoat, with option of second topcoat in more heavily trafficked areas.
- Anti-slip grains should be scattered on either the primer or the first of two topcoats.
Nitoflor PAFS Primer is supplied as two components that are site mixed, squeegeed and back rolled, then broadcast with anti-slip grains or coloured flakes/ quartz as required.
General information
Color | Other Blue Green Grey Orange |
Finish | Anti-slip |
Material | Other Guidance for specification option: Polyaspartic. |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | M12/110 Resin flooring M12/10 Resin flooring |
Specification data - High-build floor coatings
Colour | Dark Grey.Mid-Grey.Light Grey.Blue.Green.Red.Yellow.Black.White.Translucent.Other.Guidance for specification option: Special colours available on request; consult manufacturer and insert requirements. |
Thickness | Primer and Topcoat (1 coat), 0.8 mm (excluding aggregate). |
Appearance | Translucent (Primer); Pigmented (Topcoat). |
Viscosity | 150–180 mPa·s. |
Bond strength | To EN 1542:1999, 3.8 MPa. Manufacturer guidanceBond strength by pull-off test. |
Water vapour transmission properties | To EN ISO 7783:2012, 62 m. |
Capillary absorption | To EN 1062-3:2008, 0.0001 kg (m-² h-^0.5). Manufacturer guidanceCapillary absorption and permeability to water. |
Carbon dioxide permeability | To EN 1062-6:2003, 156 m. |
Abrasion resistance | To EN ISO 5470-1:1999, 814 mg. |
Slip resistance | To EN 13036-4, 42 (Class I >40 Wet Tested); 85 (Class II >40 Dry Tested). |
Impact resistance | To EN ISO 6272-1:2012, 24.5 Nm. |
Fire classification (EN 13501-1) | Class B-s1. |
Wear resistance | To EN 13892-4:2003, 10 μm. |
CompressiveStrength | To EN 13892-2:2003, 44.4 N/m². |
Flexural strength | To EN 13892-2:2003, 34.7 N/m². |
Density | To EN 12190, 1100 kg/m³. Manufacturer guidanceDensity of hardened material. |
Literature
Nitoflor PAFS System 1 Technical Datasheet
Nitoflor PAFS Safety Datasheet
Case studies
Goldhurst Farm