Newton Trojan-Pro

Application

Suitable for pumping tasks ranging from the lifting of sewage from basements to a higher-level sewage system to the removal of ground water and surface drainage.

Description

Specialist, modular, multi-use pumping system.

The sump chamber is available in sizes ranging from 1200–2100 mm high, in increments of 300 mm. With an internal diameter of 830 mm, the sump is large enough to hold 24 hours of storage as required by Building Regulations (Approved Document H).

If the lowest invert is within 300 mm from FFL, the 1500 mm high sump is able to provide 300 L of 24-hour storage which is sufficient for one-bedroom properties. For 450/600 L of storage, the 1800 mm or 2100 mm sump chambers should be used respectively.

Where greater than 24-hour storage is required or where the invert is lower, one of the larger ‘whole house’ pumping systems may be required. Consult manufacturer for details.


Type:

- Pumps for Ground and Surface Water:

  • Newton CP400 - P32: The Newton CP400 is a medium head and medium performance clean water pump.
  • Newton NP400 - P2 and P3: The Newton NP400 is a high head and medium performance clean water pump.
  • Newton CP750 - P33: The Newton CP750 is a medium head and high performance clean water pump.
  • Newton NP750 - P5 and P6: The Newton NP750 is a high head and high performance clean water pump.

- Pumps for Foul Water:

  • Newton BCV-750-65 - P50 and P51 - The Newton BCV-750-65 is a 65 mm vortex pump that is large enough to remove wastewater without the need for cutting. Note: Requires a 90 mm rising main and a check-valve with at least a 60 mm opening.
  • Newton SP750 Cutter - P35 and P36 - The Newton SP750 Cutter incorporates a tungsten carbide tipped cutting impellor that rotates against a serrated suction cover in order to cut solid waste before pumping. Note: Requires a 63 mm rising main. Cutting pumps are less able to deal with wet wipes and sanitary wear.

Please Note: For safety reasons, pumps within the 1800 and 2100 mm deep chambers should be on guide rails.

General information

Shape

Modular

Size

1200 mm, 1500 mm, 1800 mm, 2100 mm (h). Internal diameter of 830 mm

Uniclass 2015

Pr_70_55_76_62 Private packaged pumping stationsPrimary

CAWS

R12/135 Private packaged pumping stations and pressure pipeline system

R18/310 Private packaged pumping stations

Specification data - Private packaged pumping stations Enhanced data

Collection tank

-

Configuration

Modular pumping system.

Capacity (minimum)

24 hours of storage.

Where greater than 24-hour storage is required or where the invert is lower, one of the larger ‘whole house’ pumping systems may be required.

Pumps

-

Impeller

Tungsten carbide tipped cutting impellor for Newton SP750 - P35 and P36.

Pump characteristic

Medium head and medium performance clean water pump.

High head and medium performance clean water pump.

Medium head and high performance clean water pump.

High head and high performance clean water pump (ground and surface water).

Vortex pump, cutting pump (foul water).

Non-return valve

Check-valve with at least 60 mm opening for Newton BCV-750-65 - P50 and P51.

Connections

-

Inlet diameter

90 mm.

Product Reference

Newton BCV-750-65 - P50

Newton BCV-750-65 - P51

Newton CP400

Newton CP750 - P33

Newton NP400 - P2

Show more

Height

1200 mm.

1500 mm.

1800 mm.

2100 mm.

Similar products from Newton Waterproofing Systems

DAB E.Box

DAB E.Box

Newton Control Panel-Pro

Newton Control Panel-Pro

Newton High Water Alarm

Newton High Water Alarm

Newton NP Effluent Water Pumps

Newton NP Effluent Water Pumps

Newton Pump Controller

Newton Pump Controller

Newton SP750 Cutter Sewage Pump

Newton SP750 Cutter Sewage Pump

Newton Titan-2 - Compact Packaged Pumping System

Newton Titan-2 - Compact Packaged Pumping System

Newton Titan-Pro – Packaged Pumping System

Newton Titan-Pro – Packaged Pumping System

Universal Wall Entry - UDME100/300

Universal Wall Entry - UDME100/300