Multi-use pumping system.
Suitable for pumping tasks ranging from the lifting of sewage from basements to a higher-level sewage system to the removal of ground water and surface drainage.
Specialist, modular, multi-use pumping system.
The sump chamber is available in sizes ranging from 1200–2100 mm high, in increments of 300 mm. With an internal diameter of 830 mm, the sump is large enough to hold 24 hours of storage as required by Building Regulations (Approved Document H).
If the lowest invert is within 300 mm from FFL, the 1500 mm high sump is able to provide 300 L of 24-hour storage which is sufficient for one-bedroom properties. For 450/600 L of storage, the 1800 mm or 2100 mm sump chambers should be used respectively.
Where greater than 24-hour storage is required or where the invert is lower, one of the larger ‘whole house’ pumping systems may be required. Consult manufacturer for details.
- Pumps for Ground and Surface Water:
- Pumps for Foul Water:
Please Note: For safety reasons, pumps within the 1800 and 2100 mm deep chambers should be on guide rails.
R12/135 Private packaged pumping stations and pressure pipeline system
R18/310 Private packaged pumping stations
Modular pumping system.
24 hours of storage.
Where greater than 24-hour storage is required or where the invert is lower, one of the larger ‘whole house’ pumping systems may be required.
Tungsten carbide tipped cutting impellor for Newton SP750 - P35 and P36.
Medium head and medium performance clean water pump.
High head and medium performance clean water pump.
Medium head and high performance clean water pump.
High head and high performance clean water pump (ground and surface water).
Vortex pump, cutting pump (foul water).
Check-valve with at least 60 mm opening for Newton BCV-750-65 - P50 and P51.
Newton BCV-750-65 - P50
Newton BCV-750-65 - P51
Newton CP750 - P33
Newton NP400 - P2
Newton NP400 - P3
Newton NP750 - P5
Newton NP750 - P6
Newton SP750 - P36