NBS Source
List your products
Newton Titan-Pro – Packaged Pumping System
Application

Specifically designed to be used with Newton System 500, the ‘Type C’ cavity drain waterproofing system.

Description

The Newton Titan-Pro is designed specifically to be used with Newton System 500, the Type C, internally applied, cavity drain waterproofing system. The adjustable neck allows for the sump to be installed at a fixed height relative to the slab so that the connection in from the Newton drainage system and the pump discharge line are made above the concrete and always at the same height relative to the slab or raft. The sump can be used with single pumps, twin pumps and twin pumps with twin discharge lines for greater pump efficiency.

The unique sump shape, together with a choice of inlet and outlet positions, allow for connections in and out of the chamber to be made to either a side wall, or to a corner.

Features:

  • Manufactured from robust high-density polyethylene (HDPE) and should provide a chamber for the lifetime of the building.
  • Compatible with a large number of Newton NP and CP clean water pumps.
  • Fully built system includes all internal pipe and pipe fittings ready for 50 mm or 63 mm rising main.
  • One-way valve for each pump included.
  • Two quick-release couplings per pump for easy installation and removal for servicing.
  • Adjustable neck ensures that the lid is always at the correct height regardless of floor finishes.
  • Newton High Water Level Alarm included with pump and pipe kits (Codes TP3 - TP47).
  • Supplied with sealed and locked recessed lid. High-end finish lids and frames are available.
  • Flat areas to the side of chamber are ready for wall flanges to receive incoming 110 mm drainage pipes. Wall flanges are available.
  • Large foot to base of chamber to prevent flotation.
  • Anti-drip system available for the inside of the chamber.
  • Wet-install kit available that includes pressure release valves and tremie pipe for installations where water is entering the excavation.

Pump:

The Titan-Pro pumping system can be supplied with single or dual automatic or manual pumps, with single or dual pipe discharge lines.

Manual pumps must be matched to the Newton Pump Controller or Newton Control Panel-Pro.

Automatic pumps are supplied with Vertical Float Switches that allow for very flexible pump switching, allowing for adjustment of the ON and OFF positions of each pump, as well as the overall height of the pump switching. Please consult manufacturer for further information.

Newton can supply the sump system as a whole or can supply the sump chamber and the fittings required for sump installation, separate to the pumps and High Water Level Alarm.

The internal pipe and fittings are included. External pipe and fittings in either 50 mm or 63 mm can be ordered as required.

Application:

Specifically designed to be used with Newton System 500, the ‘Type C’ cavity drain waterproofing system.

General information

Color

White

Features

Can be used with single pumps, twin pumps and twin pumps with twin discharge lines for greater pump efficiency, Includes Newton PA50 High Water Level Alarm (TP code)

Size

Ø 555 x 665 mm

WarrantyDescription

Chamber - Guaranteed against deterioration

Uniclass 2015

Pr_70_55_76_62 Private packaged pumping stationsPrimary

CAWS

J40/386 Cavity drainage sumps

J40/388 Cavity drainage sumps with integral pumps

R12/135 Private packaged pumping stations and pressure pipeline system

R18/310 Private packaged pumping stations

Specification data - Private packaged pumping stations

Product Reference

Newton CP250 (P29)

250 W manual pump.

Newton CP250 (P31)

250 W automatic pump with vertical float suitable for ground and surface water.

Newton CP400 (P28)

400 W manual pump.

Newton CP400 (P32)

400 W automatic pump with vertical float suitable for ground and surface water.

Newton NP400 (P2/ P3)

400 W automatic/ manual pump with vertical float suitable for ground and surface water.

Newton CP750 (P33)

750 W pump Automatic pump with vertical float suitable for ground and surface.

Newton NP750 (P5/ P6)

750 W automatic pump with vertical float suitable for ground and surface water.

Pump

-

Configuration

Specified by Newton Specialist Basement Contractor

Impeller

Pump dependent

Non-return valve

Internal pipework includes 50 mm valve

Connections

-

Inlet diameter

63 mm pipework (code TPK3)

Outlet diameter

50 or 63 mm pipework (code TPK8) included with the chamber

Control panel

Newton Control Panel-Pro (CP2)

Supplied with a vertical water level float switch and water high alarm float switch.

Newton Control Panel Pro and pre-fitted Newton Dialer (CP7)

Supplied with a vertical water level float switch and water high alarm float switch.

Newton Pump Controller (CP9)

Supplied with a vertical water level float switch and water high alarm float switch.

Integral accessories

Newton Dialer (PA5) - Can send either text or voice messages to up to five designated phones should an alarm condition occur.

Anti-Drip Kit (TPK1)

Anti-Smell Kit (TPK7)

Wall flange for 63 mm inlet (TPO1)

Wall flange for 110 mm inlet (TP02)

Wet Install Kit (TPK9)

Frame/ lid

Alulite, triple-sealed recessed lid (TPSL7)

600 x 600 mm, with 450 x 450 mm opening.

Brass edged, recessed lid (TPSL4)

600 x 600 mm, with 450 x 450 mm opening.

Galvanized steel frame, recessed lid (TPSL2)

600 x 600 mm, with 450 x 450 mm opening.

Stainless steel edged, recessed lid (TPSL3)

600 x 600 mm, with 450 x 450 mm opening.

Alarm:

High Water Level Alarm (PA50)

Switch not suitable for regular contact with sewage.

Power converter

MultiPlus 12/800/35 (BB1)

Battery backup facility for pumps of 150 W and 250 W.

MultiPlus 12/1200/50 (BB2)

Battery backup facility for pumps of 400 W.

MultiPlus 12/3000.120 (BB3)

Battery backup facility for pumps of 750 W.

Quattro 12/3000/120 (BB4)

Battery backup facility for all pumps up to 750 W.

Standby batteries

60 Ah High Efficiency battery (BB20)

101 Ah High Efficiency battery (BB21)

201 Ah High Efficiency battery (BB22)

Standard product features

Colour:

White.

Features:

Fully-built system includes all internal pipe and pipe fittings ready for 50 or 63 mm rising main, supplied with sealed and locked recessed lid and large foot to base of chamber to prevent flotation, adjustable neck to ensure lid is always at correct height.

Material:

Pumping System for Newton System 500.

Shape:

Unique sump shape.

Size:

555 x 665 mm.

Digital objects
PlatformCompatibleVersionCertified to
IFC
IFC2X3 7 1.3
Revit
Revit 2016 8 2.0
Download now from NBS National BIM Library
Literature
Third party certifications
  • 94/3010
Similar products from Newton Waterproofing Systems