Verified by manufacturer 3 months ago
BBA Agrément Certificate
Certificate type
TPO single ply membrane warm roofing systems.
Sintofoil FB Adhered waterproofing, applied with appropriate MOY TPO Membrane Adhesive over suitable substrates, for exposed roofs subjected to light (maintenance) foot traffic only.
Refurbishment of appropriate existing bitumen waterproof coverings.
Sintofoil ST Mechanically fixed waterproofing over suitable substrates for exposed roofs exposed to light (maintenance) foot traffic only, protected roofs exposed to foot traffic.
Sintofoil RG Ballasted waterproofing for ballasted waterproofing applied over suitable substrates for ballasted roofs (paving slabs / stone ballast) and roof gardens (extensive / semi-intensive / intensive / brown / biodiverse).
Synthetic TPO/FPA waterproofing membrane designed for mechanically fixed (Sintofoil ST), adhered (Sintofoil FB) or ballasted (Sintofoil RG) applications.
Produced by co-extruding a uniform UV resistant elastomerised TPO/FPA thermoplastic olefin and flexible polypropylene alloy. Sintofoil FB is bonded on the lower face to a non-woven polyester fabric reinforcing mat.
The membrane features contrasting colours on its upper and lower faces.
British Board of Agrement (BBA) certified, CE marked.
Color | Grey Light grey/ lead grey. |
Material | Polyolefin Thermoplastic polyolefin (TPO). Polypropylene Flexible. |
Length | 20000 mm 25000 mm |
Width | 2100 mm |
WarrantyDescription | 15 year MOY Sintofoil FB/ST/RG 1.2 mm. 20 year MOY Sintofoil FB/ST/RG 1.5 mm. |
Uniclass | |
CAWS | J42/10 Warm deck roof covering J42/110 Warm deck roof covering |
Preparation | - |
Horizontal work | MOY SA Primer L.Primer required for self-adhesive products only. MOY SA Spray Primer.Primer required for self-adhesive products only. Not required. |
Skirtings and vertical work | MOY SA Primer L.MOY SA Spray Primer.Not required. |
Air and vapour control layer | - |
TypeAVCL is either loose laid or self adhesive (SA). For bonded insulation a self-adhesive AVCL should be specified. For high humidity buildings (> Class 3 to BS 5250) a foil lined or foil faced product should be used. | MOY PE AVCL.Loose laid and only suitable when the insulation is mechanically fixed. MOY Sticker Sanded 3 mm.Primer required. MOY Sticker Sanded AL (Foilcore).Primer required. MOY Sticker Helast VB 500 SA.Primer required. MOY Elotene DSN SA.Primer required. |
Attachment | Loose laid.Self adhesive (SA). |
Insulation | - |
Type | MOY Paratherm F PIR Insulation, tapered.Consult manufacturer for details and insert requirements, including required fall.
Paratherm F™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board, offering a low thermal conductivity of 0.022 W/m·K. It is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. MOY Paratherm F PIR Insulation, uniform.Consult manufacturer for details and insert requirements.
Paratherm F™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board, offering a low thermal conductivity of 0.022 W/m·K. It is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture. MOY Hardrock Multi-Fix DD, tapered.Consult manufacturer for details and insert requirements, including required fall. MOY Hardrock Multi-Fix DD, uniform.Consult manufacturer for details and insert requirements. MOY Paratherm G PIR Insulation, tapered.Consult manufacturer for details and insert requirements, including required fall. Board sizes (lx w x t):
Paratherm G™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board and is suitable with MOY’s fully adhered single ply, partially bonded built-up felt and cold liquid applied waterproofing (with carrier membrane) systems. MOY Paratherm G PIR Insulation, uniform.Consult manufacturer for details and insert requirements. Board sizes (lx w x t):
Paratherm G™ is a high performance rigid thermoset polyisocyanurate (PIR) flat roofing insulation board and is suitable with MOY’s fully adhered single ply, partially bonded built-up felt and cold liquid applied waterproofing (with carrier membrane) systems. |
Attachment | MOY PU Insulation Adhesive.MOY PU Spray Applied Insulation Adhesive.MOY Tube Fasteners.Loose laid.If roof laid and ballasted immediately. |
Waterproof covering | - |
Type | MOY Sintofoil FB 1.2 mm.Adhered. MOY Sintofoil ST 1.2mm.Mechanically fixed. MOY Sintofoil RG 1.2 mm.MOY Sintofoil FB 1.5 mm.Adhered. MOY Sintofoil ST 1.5 mm.Mechanically fixed. MOY Sintofoil RG 1.5 mm.Ballasted. MOY Sintofoil RG 1.8 mm.MOY Sintofoil RG 2.0 mm. |
Attachment | MOY Tube Fasteners.For MOY Sintofoil ST. MOY TPO/EPDM Adhesive Spray Adhesive.For MOY Sintofoil FB. MOY TPO/EPDM Membrane Adhesive.For MOY Sintofoil FB. Loose laid.If roof laid and ballasted immediately (Sintofoil RG membranes only). |
Upper protection layer | MOY VLU 300 Protection Layer. |
System accessoriesConsult manufacturer for details and add further requirements as appropriate. | Walkways.MOY RWOs.Sintofoil laminated metal trims.Termination bars.Mechanical fixings.Pre-formed corners.Standing seam profiles.MOYLITE rooflight(s). |
Contains Red List materials | No |
Country of material origin | Italy |
Country of product manufacture | Italy |
Embodied carbonSynthetic rubber generally: 120 MJ/kg (University of Bath) | - |
Recyclability | The by-products of the manufacturing process could be recycled internally. Where membranes have become contaminated by external agents during service, they may be downcycled into other products or utilised in roof overlays. |
Recycled content | 8 % |