Compare

MOY Paro-Melt® Hot Melt System - Roof Waterproofing

Name: MOY Paro-Melt® Hot Melt System - Roof Waterproofing
Brand: MOY
SKU: b2Lryu3PUsj7ikmum5Zxri

Verified by manufacturer 2 months ago

MOY

Product certifications:

BBA Agrément Certificate
Certificate type
BBA Agrément Certificate
Certificate type

Hot melt polymer modified bitumen roof waterproofing system.

Jump to:

+44 (0)1245 707 449 Website

Application

Suitable for use as the structural waterproofing compound in a hot melt waterproofing system.

Description

Paro-Melt® is an elastomeric polymer modified bitumen mastic, designed for use as the structural waterproofing compound in a hot melt waterproofing system.

Installed on flat and zero-pitched roofs over suitable types of structural deck pre-treated with Paro-Melt® Holt Melt Primer. May also be used to fill joints and bridge cracks within structural decks.

As Section 7 of the BBA Agrément Certificate No 20/5745 a roof incorporating the Paro-Melt® system will be unrestricted under the National Building Regulations when used in a protected or inverted application and when covered with an appropriate surface finish, including listed inorganic coverings in the ‘Annex of Commission Decision 2000/553/EC’. CE marked.

General information

Color	Black
Material	Bitumen
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	Bespoke
Warranty description	15 year Guidance for specification option: Consult manufacturer for details. 20 year Guidance for specification option: Consult manufacturer for details. 25 year Guidance for specification option: Maximum. Consult manufacturer for details.

Uniclass	Ss_30_40_30_42 Liquid-applied inverted roof covering systemsPrimary
CAWS	J31/12 Inverted roof coating J31/130 Inverted roof coating

Specification data - Liquid-applied inverted roof covering systems

Preparation	-
Horizontal work	MOY Paro-Melt Hot Melt Primer. Guidance for specification option: Paro-Melt® Hot Melt Primer is a solvent based rapid drying bituminous primer specially modified with an adhesive. Product supplied ready to use on suitable substrates prior to installing a Paro-Melt® hot melt waterproofing system
Skirtings and vertical work	MOY Paro-Melt Hot Melt Primer.
Liquid-applied waterproofing	-
Type	MOY Paro-Melt® Compound and Paro-Melt® 4mm Hot Melt Protection Membrane. Guidance for specification option: Paro-Melt® 4mm Hot Melt Protection Membrane is a polyester-reinforced, SBS elastomeric modified bituminous waterproofing membrane with anti-root additive. It is laid directly onto the Paro-Melt® Hot Melt Compound as part of the application, and is finished on both upper and lower surfaces with fine sand to aid full adhesion into the compound. Consult manufacturer's literature for full technical details.
Reinforcement	MOY Paro-Melt Reinforcement Mesh. Guidance for specification option: Ensures required depth of compound.
Surface treatment	Surface Finish (by others).
Insulation	-
Type	MOY XPS inverted insulation (uniform thickness).
Fixing	Loose laid.
Water control layer	MOY WFRL. Loose laid.
Ballast	- Manufacturer guidance Suitable ballast finish (by others) - 50 mm thick concrete paving / 50 mm thick 20-40 mm rounded stone ballast / green roof.
System accessories	MOY RWO’s. GRP trims. Termination bars. Mechanical fixings MOY Flex Joint EP20/EP40 MOY expansion joint strips. MOY PP3 Roof Nek & penetration pevices. MOY Roof box penetration units. MOY SBS universal fixing points. Manufacturer guidance Consult manufacturer for details and insert further requirements as required.

Sustainability data

Contains Red List materials	No
Country of material origin	Austria
Country of product manufacture	Austria
Material	Bitumen
Recyclability	Hot-melt provides excellent life-cycle costings as durability of the waterproofing system as it is “designed for the lifetime of the building” – See BBA for details). This means there is generally no need to replace the product during the roof's expected life.
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %