Movement Ties - Masonry to Masonry or Steelwork
Verified by manufacturer 23 days ago
SPE/B20 Safety plain end tie/ blank
SPE/B20 Safety plain end tie/ blank
ISO 9001 Quality Management
Certificate type
Range of ties allows masonry walls to be tied back to other structures, (steelwork or masonry) providing restraint in one direction but allowing movement in the other.
Application
- Allows masonry walls to be tied back to other structures, (steelwork or masonry) providing restraint in one direction but allowing movement in the other.
- Also used in movement joints where they occur in long runs of brickwork, the ties span over a vertical joint preventing vertical movement but allowing horizontal expansion and contraction.
Description
Range of ties allows masonry walls to be tied back to other structures, (steelwork or masonry) providing restraint in one direction but allowing movement in the other.
This is achieved by placing a debonding sleeve over the part of the tie which is to be embedded in the wall, allowing the tie to move within the sleeve.
Features and benefits:
- Also used in movement joints where they occur in long runs of brickwork, the ties span over a vertical joint preventing vertical movement but allowing horizontal expansion and contraction.
- Manufactured from grade 304 stainless steel.
General information
Color | Silver |
Material | Stainless steel Guidance for specification option: Grade 304. |
Length | 75 mm 100 mm 125 mm 150 mm 175 mm |
Uniclass | |
CAWS | F30/282 Slip ties |
Specification data - General-purpose slip ties
Standard | To BS EN 845-1. |
Material | Grade 304 stainless steel. |
Length | 150 mm.175 mm.200 mm.225 mm.250 mm.275 mm.300 mm.Manufacturer guidanceSupplied in boxes of 250. |
End types | Asymmetrical flat plate holed for mortar embedment.Guidance for specification option: Slip case specified separately below. Manufacturer guidanceUsed over a movement joint in a run of brickwork or blockwork with safety embedment detail or plain end (B20). |
Design embedment length (minimum) | 62.5 mm. |
Additional requirements | |
Mortar joint thickness (minimum) | 10 mm. |
Shear load capacity | Manufacturer's standard.Guidance for specification option: Consult manufacturer's literature for details. |
Debonding sleeves | V36-100-PDBS: 20 x 100 mm. V36-120-PDBS: 20 x 120 mm. V36-150-PDBS: 20 x 150 mm. V31-100-PDBS: 25 x 100 mm. V31-120-PDBS: 25 x 120 mm. Manufacturer guidance
|
Sustainability data
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Recyclability | Recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Third party certifications
ISO 9001 Quality Management
ISO 9001
Literature
Wall Ties Brochure
V7PE Frame Cramp with Drip Data Sheet
SPF Safety Plain Formed Tie Data Sheet
V7PE 75-300mm Declaration of Performance
SPE 150-300mm Declaration of Performance
SPF-200-STST Declaration of Performance