Metro Bi-Parting Gate MFP

Cabinet size (h x l):

1072 x 1930 mm.

Material:

• Casework: 2 mm thick grade 1.4301 (304) grained stainless steel.

• Moving panels: Metal core coated with energy absorbent integral polyurethane. Resistant to lateral 800 N impact force without the loss of functionality.

Mode of operation:

Controllable via interface connection to automated fare collection (AFC) control system. On receiving a signal from the AFC control system, or remote control, the flap leaves open (normally closed (N/C)). If an unauthorized person tries to tailgate or attempts to enter from the opposite direction, the internal alarm system is activated. If within the pre-set timeout no passage has occurred, the flaps will close and reset. Normally open (N/O) provides an open walkway in home position and will only close at unauthorized entry or tailgating attempts.

• Uni-directional with single person detection.

• Bi-directional with single person detection.

• Emergency, configurable to fully open or block the passageway.

• Remote passage control.

• Traffic way switchable during rush hours.

• Passenger stacking.

Security features:

• High-performance fraud detection through sophisticated and proven algorithm.

• Strategically concealed TX and RX infrared photocell arrays.

• More than 40 different passage scenarios handled, including intrusion, tailgating, piggybacking, wrong way direction, leave aisle timeout, anti-crawling flap leaf barrier, passenger with a hand carried luggage, passenger with wheeled trolley luggage.

• >95% detection rate even in complex scenarios at 150 mm distance.

Safety features:

• Safety force sensing.

• Accurate presence sensing.

• Emitter/ receiver infrared sensors technology monitoring the area immediately around the moving flaps.

• Logic voltage 24 V AC.

• Voltage free contact input for fire alarm fail state.

• Moving panels constructed from semi-rigid polyurethane mounted on to a steel core to limit potential damage to passenger.

• Dynamic impact force compliant with BS EN 60335-2-103.

• Anti-panic breakthrough force of up to 325 N.

• Finger entrapment complies to BS EN 60335-2-103.

• Wide walkway for wheelchair or easier access.

• Accompanied wheelchair or child passage management.

Passenger information:

Top casework mounted LED display to show the passenger and/ or station staff:

• Green: Authorized transit.

• Red: Non passage transit.

• Orange: Concession transit.

Gate end displays:

• For guiding passengers there are light indicators integrated into each end leg of the housing (red cross and green arrow).

• Remotely switchable to conform to the flow of gates at peak times or to close the complete system.

Maintenance access:

• Access to ticket controller and gate management system via slide out end panels mounted on heavy duty guide rails.

• Servicing does not impinge on adjacent passageways.

• Minimal removal parts to reduce mechanical failure and longevity or wear during servicing.

Power failure management:

• The moving panels can be configured to automatically fail open or remain closed dependent upon if failsafe mechanism is chosen.

• Upon restoration of power the gate will recycle the panels to the closed position and become available for use once the AFC system is rebooted.

Technical characteristics:

• Power supply: 230 V AC (50 Hz)/ 115 V AC (60 Hz).

• Power rating: Standby mode: 50 VA; in operation: 220 VA.

• Fire signal: Input for voltage free contact.

• Operating temperature: 0–45°C (at 95% relative humidity (RH) non-condensing). Down to -20°C with heating system.

• IP rating: IP43.

• Mean cycle between failure (MCBF): 12 million cycles.

• Mean time to repair (MTTR): <30 minutes.

• Flow rate: ≤60 passages/minute dependent on reader.