Marathon Glass Dry Area Lockers
Marathon Dry use lockers are designed for use in dry changing areas Marathon Dry use lockers are designed for use in dry changing areas, offering a contemporary look for modern changing area design.
Dry use lockers consist of melamine faced high density particle board bodies with screw and dowel construction.
Base, top and shelf units are from the same material with 2 mm PVC edge banding to front edges. The locker bodies are available in a variety of height combinations and widths. Door frames are constructed from extruded aluminium profiles, pre-drilled for on-site assembly. Aluminium and stainless steel hinges engage into door frame profiles and doors have spring loading for automatic closing. Adjustments are possible for horizontal and vertical alignment of doors. Neoprene door buffers engage into aluminium profiles.
Doors and matching decorative end panels are available in toughened float glass with coloured ceramic paint finish. Doors are attached to hinges with stainless steel screws into aluminium rosettes anodized to match door frame profiles.
Features and benefits:
Color | Glass: 16 Standard RAL colours, non-standard colours available on request |
Features | Concealed door frames from extruded anodised aluminium, Hinges limited to approximately 90° to prevent the doors opening across adjacent lockers, wide range of locking and access systems available |
Material | 15 mm melamine faced high density particle board bodies with screw and dowel construction |
Uniclass 2015 |
Product Reference | Marathon Dry Use Lockers - Glass |
Size | - |
Height | 900 mm1100 mm1500 mm1800 mm2000 mmSpecial orderConsult manufacturer and insert requirements. |
Width | 300 mm400 mmSpecial orderConsult manufacturer and insert requirements. |
Depth | 500 mmStandard. Special orderConsult manufacturer and insert requirements. |
Configuration/ Type | One tier, single compartment with additional shelf at 300 mm down from topTwo tier, two equal height compartments with coat hooksTwo tier, two equal compartments with integral seats 'welled locker'Three tier, three equal compartmentsThree tier, unequal, one half-height compartment with coat hooks over two quarter-heightFour tier, four equal compartmentsFive tier, five equal compartmentsSix tier, six equal compartmentsZ type, two equal height compartments in a Z-shape configuration |
Door panel | - |
Type | 10 mm toughened float glass10 mm toughened float glass - Opti-white10 mm toughened cast glass10 mm toughened cast glass - Opti-white10.76 mm toughened and laminated float glass10.76 mm toughened and laminated float glass - Opti-white |
Colour/ Finish | Opaque ceramic painted glass, colourAs scheduleConsult manufacturer and insert requirement. |
End panel | - |
Type | 10 mm toughened float glass10 mm toughened float glass - Opti-white10 mm toughened cast glass10 mm toughened cast glass - Opti-white10.76 mm toughened and laminated float glass10.76 mm toughened and laminated float glass - Opti-white |
Colour/ Finish | Opaque ceramic painted glass, colourAs scheduleConsult manufacturer and insert requirement. |
Locking system | - |
Type | DigilockDry area cam lockHasp and claspHasp and cam lockKaba removable cylinder coin lock with coin refundKaba removable cylinder coin collect lock with coin retain functionProspec mechanical code lockProspec OCSProspec OTSProspec OTS advancedProspec removable cylinder coin lock with coin refundProspec removable cylinder card lockProspec removable cylinder coin collect lock with coin retain functionProspec removable cylinder dual coin collect lock with coin retain functionWet area cam lock |
User key | Numbered keystrap with stainless steel bucklesConsult manufacturer for colour option and insert requirement. Numbered discs/ safety pin |
Locker door numbering | NoneAluminium number plateStandard. Brushed stainless steel 35 mm diameter numbered discDDA compliant number plate (30 mm high tactile numerals)DDA compliant number plate (30 mm high tactile numerals and Braille)EngravedInto surface of door panel. OtherConsult manufacturer and insert requirement. |
Support Plinths | NoneAluminium angle supportAluminium tubular support frameMild steel support framePrecast concrete plinth (by contractor or others)Softwood timber frameSteel locker support frame with integrated seat |
Fascia | NoneCompact Grade LaminateSpecial orderConsult manufacturer and insert requirement. |
Seat top | Not applicable12 mm Compact Grade Laminate12 mm postformed Compact Grade LaminateHardwood timberSpecial orderConsult manufacturer and insert requirement. |
Accessories | NoneChrome hanging railOne per compartment. Suitable for compartments equal or over 900 mm high, confirm with manufacturer if integral double hook is still required. Captive plastic hangerOne per compartment. Fascia panels above lockers to ceiling (Compact Grade Laminate)Consult manufacturer and provide laminate colour and ceiling height. Fascia panels above lockers to ceiling (glass)Consult manufacturer and provide glass specification, colour and ceiling height. Internal aluminium shoe shelfSloping tops to lockers (Compact Grade Laminate)Consult manufacturer and provide laminate colour and degree of slope required. Sloping tops to lockers (glass)Consult manufacturer and provide glass specification, colour and degree of slope required. |
Standard product features | Carcass: - Type: 15 mm thick melamine faced high density particle board. - Colour: White. Shelf units: - Type: 18 mm thick melamine faced high density particle board. - Colour: White. Door frames: Extruded aluminium profiles. Door hinges: Aluminium and grade 316 stainless steel with spring loading for automatic door closing. |
Product Options | Locking system:
|
Platform | Compatible | Version | Certified to |
---|---|---|---|
![]() | - | 1 | 2.1 |
![]() | - | 1 | 2.1 |