Compare

Louvre Guard

Name: Louvre Guard
Brand: Senior Architectural Systems Ltd
SKU: eTQqBMsw4jQsJ6cuSM4b3p

Verified by manufacturer 2 months ago

Senior Architectural Systems Ltd

Third party certifications:

UKAS
Certificate type

Externally mounted louvre for aluminium windows.

Jump to:

+44 (0)1709 772600 Website

Application

Suitable for buildings where high ventilation is needed, whilst keeping occupants safe from the risk of falling from a window.

Description

An aluminium louvre which can be used with the inward opening SPW600 and PURe® window systems. Available anodized in either silver or bronze, or in any standard RAL colour.

Features and benefits:

The system is easy to install.
Consists of an external adaptor and oval shaped blades, which are fixed to the outside of an inward opening window.
It can be positioned horizontally or at any angle up to 45° in either direction. This means the windows can open to their maximum angle, maximizing ventilation whilst guarding those inside from the risk of falling from the window.
Manufactured from extruded aluminium, the system is fully recyclable and has a lifecycle of more than 40 years.
Fully compatible with SPW600 and PURe® inward opening windows.

It is either fixed through the face of the window or through a bespoke coupling mullion, therefore maintaining the thermal barrier. It has been fully barrier load and impact load tested and is available with a maximum blade span of 1000 mm. Barrier load tested to BS 6180 and impact load tested to BS EN 13049: Class 5.

General information

Finish	Anodized Powder-coated
Material	Aluminium
Length	Bespoke
Width	Bespoke
Height	Bespoke

Uniclass	Pr_30_59_48_04 Aluminium louvre panel unitsPrimary
CAWS	L10/330 Aluminium windows L10/25 Aluminium windows

Product range	Louvre Guard

Specification data - Aluminium louvre panel units

Size (l x w x d)	Guidance for specification option: Insert requirements: Available with a maximum blade span of 1000 mm.
Material	Aluminium. Guidance for specification option: Framing sections/ louvre blades: Extruded aluminium alloy 6060 or 6063 T6 to BS EN 755-9 or BS EN 12020-2. Thermal barriers: Polyamide manufactured in accordance with PA66 GF25.
Finish	Anodized. Polyester powder coating, RAL.
Colour	Guidance for specification option: Insert colour requirement for powder coating. Available or in any standard RAL colour. Consult manufacturer for further information.
Construction	Constructed using louvre blades screwed to a receiver section, which is screw fixed to the relevant window outer frame/ mullion. Screw fixings are then concealed with an extruded capping section which is then finished with an injection moulded end cap.
Louvre configuration	-
Blade orientation	Horizontal.
Blade angle	- Manufacturer guidance Insert requirement, can be positioned horizontally or at any angle up to 45°.