Verified by manufacturer 6 months ago
Köster VAP I 2000 UFS (Ultra Fast Set) - 3 hour cure
EPD
Certificate type
ISO 9001 Quality Management
Certificate type
BBA Agrément Certificate
Certificate type
One coat barrier system for the protection of floor build-ups from the effects of moisture and high alkalinity within concrete floor slabs.
For application to unsealed interior concrete floor slabs such as in industrial and multi-purpose halls, offices, hospitals, schools, supermarkets, manufacturing facilities, airplane hangars, storage and retail space, and commercial and residential construction which is exposed to moisture from the underside due to faulty or missing damp proof membrane (DPM) to the underside of the concrete.
For application in fast-track construction where there is vapour barrier (DPM) installed under the floor slab, but application of the floor build-up is required before the concrete has completely dried out and the RH readings for the floor are above those advised for the floor finish.
Koster VAP I 2000 UFS is particularly suitable for overnight reflooring projects, where the flooring needs to be installed quickly in areas where the DPM is missing, compromised or status unknown.
During drying of concrete high alkalinity can become concentrated towards the top surface of the concrete, causing damage to some resin floors and adhesives. VAP I 2000 and VAP I 2000 UFS are resistant to alkalinity (pH 13–14) and serve as a barrier protecting the floor build-up from the effects of high alkalinity.
In situations where a vapour open flooring is to be used, but the DPM is missing, damaged or status unknown, the VAP I 2000 and VAP I 2000 UFS, will create an effective vapour barrier, preventing elevated humidity levels within the room (a particular issue for basement rooms).
The full VAP I 2000 and VAP I 2000 UFS must always be applied to a shot-blasted finish (or Koster approved equivalent). For lightly trafficked, smaller areas where shotblasting is not practical, the Koster VAPLite System (covered by a separate NBS) is recommended. This provides a negative side waterproofing, a quantifiable vapour barrier and high strength screed, within a 10 mm build up.
A one-coat, membrane-forming, vapour control system consisting of a combination of epoxy resins and other compounds achieving a very high interlacing density yet maintaining a very low viscosity to optimise saturation, and key to the concrete substrate. When using Koster VAP I 2000 the risks of failure in resin, vinyl and other resilient flooring due to osmosis or vapour drive can be successfully managed.
Features and benefits:
Koster VAP I 2000:
Koster VAP I 2000 UFS:
Color | Clear |
Finish | Smooth |
Material | Epoxy Manufacturer guidanceEpoxy based. |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Ten year Guidance for specification option: Manufacturer’s warranty. |
Uniclass | |
CAWS | M60/180 Floor coating M12/110 Resin flooring C42/345 Protective coatings for concrete M60/175 Protective coating M12/10 Resin flooring E41/520 Surface sealer M10/680 Surface sealer to wearing screeds |
Product range |
Composition | Synthetic resin. |
Primer | Not required.Koster KB Pox IN.Guidance for specification option: For pre-treating concrete where severe outgassing is an issue. |
Category | Surface-penetrating and film-forming. |
Colour | Clear. |
Curing time | Approximately three hours. Guidance for specification option: At 20°C. |
Performance characteristics | Manufacturer's standard. Guidance for specification option:
|
Technical characteristics, other | Manufacturer's standard. Guidance for specification option:
|
Screed | Not required. Guidance for specification option: No screed. Koster SL Premium and VAP 06 Primer. Guidance for specification option: Primer for non-absorbent surfaces and high strength, self-levelling screed. |
Finishing Options | Not required. Guidance for specification option: Floor finish supplied by others. Koster CT 215 Universal Floor. Guidance for specification option: Water based epoxy for low to medium stresses. Koster LFVL. Guidance for specification option: Self levelling epoxy floor for medium to high stresses. Koster EDS System. Guidance for specification option: For protection against electrostatic discharge. |
Contains Red List materials | No |
Country of material origin | Germany |
Country of product manufacture | Germany |
Recyclability | No |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Koster Flooring Systems - Protection to Concrete bund
Koster Floor coatings to a domestic garage.
Aintree Racecourse - Koster Flooring Systems to Grandstand
Hasbury Methodist Church - Koster Flooring Systems
Koster Flooring Systems, 96 Middlesex St. London
Schneider Electronics Factory - Koster Flooring Systems
Underground Car Park - Koster flooring systems
Vapour Control Epoxy flooring to luxury basement in Surrey