Perforated steel planks, available in a wide range of variants.
Features and benefits:
- High slip resistance.
- Suitable for use in high load areas.
- C-profiled structural plank, manufactured on CNC punching machines.
- No sharp edges allowing barefoot access, drainage holes avoid aquaplaning.
- BN-G has closed, punched dimple indentations, pressed upwards in the top surface. Offers high anti-slip resistance.
- BN-GA includes a mixture of closed punched holes facing upwards, and conical drain holes facing downwards. Grating has no sharp edges on the top surface, and can be walked on easily without the need for footwear. Water drains easily through the holes, so that no hydroplaning can occur.
- BN-O similar to BN-OP, with punched holes, which are pressed downwards. Provides increased drainage performance, and light and air permeability.
- BN-OD plank with two different hole sizes; the holes punched upwards have a diameter of 14 mm (to allow quicker drainage), while those punched downwards have a diameter of 7 mm.
- BN-OF fire retarding, provides an alternative to conventional coverings. The planks have an outward edge to one underside edge, achieving an approximate support area of 20 mm, and both the short edges come with closed sides.
- BN-OP similar to BN-O, with double the amount of drainage holes. Provides increased drainage performance, and light and air permeability.
- BN-OP5, punched grid pattern correlates with the BN-OP plank, but has 5 mm drainage holes and 5 mm slip resistance holes. Allows for a stiletto heel proof surface with high slip resistance. The small hole configuration makes it difficult to see from below.
- BN-OP5 (with treads), with special visible nosing treads which are public access compliant, helping the visually impaired to establish the edge of the treads. The nosing can be polyester powder-coated to any RAL colour; consult manufacturer for details.
- BP-H and BP-HN flame retarding, with glass foam granulate filling which is moisture resistant, fire-proof and stable up to 600°C.
- BZ-G where this grating is used, there will be a decreased need for sprinkler systems below this flooring level.
- BP-UE similar to the BP, with a higher slip resistance due to additional raised punching.
- BR rhombic profile with extra high punching (punched holes at 2.5 mm).
- BZ has distinctive surface profiling and a high level of slip resistance.
- BP (Parallel), smooth line profiling and high loading capacity.
Fire/ flame retardant variants (BP-H, BP-HN and BN-OF):
- High safety levels during maintenance.
- Optimum flow speed of oil, tempering and rain-water.
- Provide containment and delay of fire in the collecting pan.
- Have a shorter than average switch-off period of the transformer.