You are viewing content for United Kingdom.

Choose a country to see content for your location. Changing region will navigate you to the homepage.

NBS Source
I'm a manufacturer
NBS Source

Koster Deuxan 2C - Cold Applied Polymer Modified Bitumen Seamless Waterproof Coating

Verified by manufacturer today

Delta Membrane Systems Ltd Product certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Cold applied polymer modified bitumen waterproof coating.

Jump to:
BOS
 +44 (0)1992 523523 Website

Application

  • Designed for the safe and permanent outside waterproofing of basement walls, foundations, floor plates, etc.
  • For intermediate waterproofing of balconies and terraces.
  • Also suitable for the intermediate waterproofing underneath screeds and for bonding insulation and drainage boards.


Description

Cold applied polymer modified bitumen waterproof coating.


Features and benefits:

  • Polystyrene-free, fibrated and polymer modified.
  • Bridges substrate cracks safely and against pressurized water.
  • Radon-proof.


General information

Color

Black

Material

Bitumen

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

Uniclass

Pr_35_31_68_17 Cold-applied polymer-modified bitumen waterproof coatingsPrimary

CAWS

J30/10 Cold-applied damp-proofing

J30/110 Cold-applied tanking

J30/130 Cold-applied damp-proofing

SKU Code

DMS 169

Specification data - Cold-applied polymer-modified bitumen waterproof coatings

Classification data

Colour

Black.

Composition

Bitumen/ Rubber with a reactive powder.

Coating

-

Manufacturer guidance

Coating system: Two layers.

Layer thickness

-

Manufacturer guidance

Dry layer thickness (minimum):

  • Waterproofing against ground moisture, non-retained seepage or non-pressurized water: 3 mm (4 mm wet layer thickness at 4.0 kg/m²).
  • Waterproofing against retained seepage: 4 mm (6 mm wet layer thickness at 6 kg/m²).


Density

1.07 g/cm³.

Guidance for specification option:

Mixture density.

Resistance

70°C.

Guidance for specification option:

Heat resistance.

Waterproofing

<5 bar.

Guidance for specification option:

Waterproof after full cure (DIN 1048–5).

Curing time

24 H.

Guidance for specification option:

Curing time (at 20°C), approximately.

Application temperature

-

Manufacturer guidance

  • Ambient: 5–35°C.
  • Substrate: 5–30°C.


Primer

Köster Polysil® TG 500.

Guidance for specification option:

Mineral substrates.

No primer necessary.

Guidance for specification option:

Polystyrene substrates.

Reinforcement

-

Manufacturer guidance

Embed Köster Glass Fibre Mesh at corners, fillets and areas strongly in danger of cracking.

Mortars and expansion Joints

-

Manufacturer guidance

Seal expansion joints by applying Köster Special Joint Tape in the joint areas of the thick film sealant.

Protection

-

Manufacturer guidance

  • Prior to backfilling, the fully cured coating must be protected from mechanical damage.
  • The use of Delta Geo-Drain Quattro Protection and Drainage Sheet is recommended.
  • Polystyrene drainage boards, perimeter insulation, etc. can be spot-bonded.
  • Bond protection boards with Köster Deuxan® 2C.


Material

Polymer.

Sustainability data

Contains Red List materials

No

Country of product manufacture

Germany

Material

Bitumen

Recyclability

No

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

2

IFC
 -

1

Product certifications

BBA Agrément Certificate

BBA Agrément Certificate

BBA Certificate Koster Deuxan 2C

© 2025 Hubexo North UK Ltd. All rights reserved.