Name: Knauf MF Ceiling: MF-1-15-WB-100
Brand: Knauf UK
SKU: qXm66xpPre1UT1abeNwhDc

Material

Gypsum

Metal

Glass mineral wool

Shape

Rectangle

Other

Square

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Ss_30_25_10_35 Gypsum board suspended ceiling systemsPrimary

CAWS

K10/50 Suspended ceiling system on metal framing

K10/220 Proprietary suspended ceiling system

Suspension grid

Knauf Angle Section 25 x 25 mm at maximum 1200 mm centres.
Knauf MF Primary Support Channels to be located at 1200 mm centres.
Knauf MF Ceiling Channels to be located at maximum 450 mm centres.

Suspension grid fasteners

Knauf MF Connecting Clips to be fixed at intersection between Knauf MF Primary Support Channels and Knauf MF Ceiling Channels.
Note: Secondary fix with Knauf Wafer head Screws to Knauf MF Primary Support Channels and Knauf MF Ceiling Channel.

Note 1: For substrate fixings, approved fixings are required to meet performance constraint. Site design team to agree the suitability of design and method of installation suitability for the project.
Note 2: Confirmation is required to meet substrate type, ceiling specification weight and any additional loading.

Insulation

100 mm Knauf Insulation Acoustic Roll.

Linings

1 x 15 mm Knauf Wallboard fixed to underside of Knauf MF Ceiling Channels.

Fasteners

25 mm Knauf Drywall screws - self tapping.

Joint treatment

Location of horizontal joints coincide with Knauf MF Ceiling Channels.

Finish

For paint finishes: System must be taped and jointed using Knauf Joint Filler (Premium) or Knauf Joint Cement Premium and Knauf Joint Tape (Paper). Or alternative Knauf jointing compounds manufactured to EN 13963.
Knauf Wallboard Primer applied once taping and jointing completed.
Prior to where paint decoration is required. For preparation for decoration of where gypsum plaster skim is required, the outer layer of plasterboard joints is required to be taped and filled, using Knauf Joint Filler (Premium) and Knauf Joint Tape (Paper) meeting quality level 1 in accordance with Eurogypsum - Drywall Jointing & Finishing - Surface quality level classification.
For application where gypsum skim finish is required, the Knauf system is to be taped and filled using Knauf jointing compounds.

Execution

Consult manufacturer's literature at
https://www.knauf.co.uk/our-services/resources

Country of material origin

Spain

Manufacturer guidance

Applies to our natural gypsum only which is the main component of plasterboard. Other components are from other countries. Please contact Knauf for more details.

Country of product manufacture

United Kingdom

Manufacturer guidance

UK applies to the majority of manufacture but a small percentage of finished items may be imported. Please contact Knauf for more details.

Material

Gypsum

Metal

Glass mineral wool

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

Manufacturer guidance

Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1

Recyclability

Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

11.9 %

Manufacturer guidance

(2023 average by mass for all UK produced plasterboards, recycled gypsum & paper)

Material	Gypsum Metal Glass mineral wool
Shape	Rectangle Other Square
Length	Bespoke
Width	Bespoke
Height	Bespoke

Country of material origin	Spain Manufacturer guidance Applies to our natural gypsum only which is the main component of plasterboard. Other components are from other countries. Please contact Knauf for more details.
Country of product manufacture	United Kingdom Manufacturer guidance UK applies to the majority of manufacture but a small percentage of finished items may be imported. Please contact Knauf for more details.
Material	Gypsum Metal Glass mineral wool
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	- Manufacturer guidance Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1
Recyclability	Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1
Recycled content As defined in clause 7.8 of BS EN ISO 14021	11.9 % Manufacturer guidance (2023 average by mass for all UK produced plasterboards, recycled gypsum & paper)

Knauf MF Ceiling: MF-1-15-WB-100

Application

Description

General information

Material

Shape

Length

Width

Height

Uniclass

CAWS

Specification data - Gypsum board suspended ceiling systems

Suspension grid

Knauf Angle Section 25 x 25 mm at maximum 1200 mm centres.Knauf MF Primary Support Channels to be located at 1200 mm centres.Knauf MF Ceiling Channels to be located at maximum 450 mm centres.

Suspension grid fasteners

Insulation

100 mm Knauf Insulation Acoustic Roll.

Linings

1 x 15 mm Knauf Wallboard fixed to underside of Knauf MF Ceiling Channels.

Fasteners

25 mm Knauf Drywall screws - self tapping.

Joint treatment

Location of horizontal joints coincide with Knauf MF Ceiling Channels.

Finish

Execution

Consult manufacturer's literature at https://www.knauf.co.uk/our-services/resources

Fire resistance

Sustainability data

Country of material origin

Manufacturer guidance

Country of product manufacture

Manufacturer guidance

Material

Embodied carbon

Manufacturer guidance

Recyclability

Recycled content

Manufacturer guidance

Third party certifications

Third party certifications

Literature

Knauf Angle Section 25 x 25 mm at maximum 1200 mm centres.
Knauf MF Primary Support Channels to be located at 1200 mm centres.
Knauf MF Ceiling Channels to be located at maximum 450 mm centres.

Consult manufacturer's literature at
https://www.knauf.co.uk/our-services/resources