Compare

Knauf Direct Bonding: DB-12.5-MP - Wall Lining System

Name: Knauf Direct Bonding: DB-12.5-MP - Wall Lining System
Brand: Knauf UK
SKU: uZ76cvXkpoQMxNqxZmPP9F

Verified by manufacturer 1 month ago

Third party certifications:

Knauf Direct Bonding provides a high quality, robust lining to various masonry backgrounds.

Jump to:

Application

Suitable for use for lining to various masonry backgrounds.

Knauf Direct Bonding provides a high quality, robust lining to various masonry backgrounds.

Uniclass	Ss_25_25_45_35 Gypsum board wall lining systemsPrimary
CAWS	K10/45 Wall lining system (adhesive) K10/185 Wall lining system (adhesive)

Support	N/A.
Insulation	N/A.
Linings	1 x 12.5 Knauf Moisture Panel to room side.
Fasteners	Adhesive centres: 600 mm. Row of adhesive dabs: 4.
Joint treatment	N/A.
Finish	For paint finishes: System must be taped and jointed using Knauf Joint Filler (Premium) or Knauf Joint Cement Premium and Knauf Joint Tape (Paper). Or alternative Knauf jointing compounds manufactured to EN 13963. Knauf Wallboard Primer applied once taping and jointing completed. Prior to where paint decoration is required. For preparation for decoration of where gypsum plaster skim is required, the outer layer of plasterboard joints is required to be taped and filled, using Knauf Joint Filler (Premium) and Knauf Joint Tape (Paper) meeting quality level 1 in accordance with Eurogypsum - Drywall Jointing & Finishing - Surface quality level classification. For application where gypsum skim finish is required, the Knauf system is to be taped and filled using Knauf jointing compounds. When using Knauf Performance Plus, the applicator of gypsum skim finish is required to check if pre-treatment is required.

System code	DB-12.5-MP.
Partition height	- Manufacturer guidance Insert requirements. Single plasterboard length (up to 3000 mm if using 3000 mm-long plasterboard).

Country of material origin	Spain Manufacturer guidance Applies to our natural gypsum only which is the main component of plasterboard. Other components are from other countries. Please contact Knauf for more details.
Country of product manufacture	United Kingdom Manufacturer guidance UK applies to the majority of manufacture but a small percentage of finished items may be imported. Please contact Knauf for more details.
Material	Gypsum
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	- Manufacturer guidance Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-1
Recyclability	Individual product EPDs for plasterboard and metal components available at: https://www.knauf.co.uk/our-services/resources/environmental-product-declarations-2
Recycled content As defined in clause 7.8 of BS EN ISO 14021	11.9 % Manufacturer guidance (2023 average by mass for all UK produced plasterboards, recycled gypsum & paper)