Kalzip Liner Roof System 0.18 U-Value

Kalzip Liner Roof System 0.18 U-Value

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Kalzip Ltd

Metal liner roof system, with a thermal transmittance (U-Value) of 0.18 W/m²K.

Jump to:
+44 (0)1942 295500 www.kalzip.com
Application

For roof applications.

Description

Metal liner roof system, with a thermal transmittance (U-Value) of 0.18 W/m²K. Suitable for use where speed of installation is required.

All work undertaken should be fully in accordance with Kalzip standard recommendations and by Kalzip approved welding contractors. Site welding must be carried out fully in accordance with Approved Welding Procedure Specification ASW/TIG/001 Rev ‘B’ 1997 as defined in BS EN ISO 9606-2 for material gauges between 0.8–3 mm thickness. Site welding operatives must be certified to BS EN ISO 9606-2 standard for material gauges between 0.8–3 mm thickness. The weld test procedure shall be in accordance with BS EN ISO 15614-2: 2005.

Kalzip sheets to be installed as per cladding manufacturer's instructions, British Board of Agrément Certification No. 98/3481 and Institute fur Bautechnic Zulassungbescheid N R 14.1-181.

Features and benefits:

  • The Kalzip liner roof system has the outer Kalzip standing seam roof sheet and the internal Kalzip liner trapezoidal profiled liner sheet laid in the same direction across roof purlins, acting as the primary support. Typical purlin centres would be approximately 1.4–1.8 m.
  • A non-fragile walkable Kalzip liner sheet can be quickly installed to provide a weather cover for those working below. The remainder of the roofing components can then be installed without affecting the critical path of the construction programme.
  • Suitable for a wide range of applications.

Application:

For roof applications.

General information

Features

First fix liner installed to provide a weather cover for those working below

Finish

Many options available

Material

Kalzip profile: Aluminium alloy to BS EN AW 3004 (AlMn1Mg1), 0.2% proof stress (Rp0.2): 185 N/mm² (minimum). Ultimate tensile strength (Rm): 220 N/mm² (minimum)

Liner profile: Galvanized steel to BS EN 10326

Thermal insulation: Mineral wool insulation, manufactured in accordance with BS EN 13162

Profile fillers: Black closed cell cross-linked polyethylene with a minimum density of 30 kg/m³

Shape

To suit project requirements

Size

To suit project requirements

WarrantyDescription

Standard ten years

Uniclass 2015

Ss_30_40_65_50 Metal profiled sheet self-supporting roof covering systemsPrimary

CAWS

H31/10 Metal

H31/120 Metal

Specification data - Metal profiled sheet self-supporting roof covering systems Enhanced data

Product Reference

Kalzip Liner Roof System 0.18 U-Value

Liner sheets

-

Material

Kalzip Liner TR35/200S

Primary fasteners

5.5 mm diameter carbon steel self-drilling fasteners (SD-3-T15-5.5x25)

End and side laps

Side laps to be stitched at maximum 400 mm centres with 4.8 mm diameter carbon steel self-drilling stitching fasteners (SL2-T-4.8x20)

Vapour control layer

-

Material

Kalzip VCL Clear - Reinforced virgin polyethylene with 530 MNs/g vapour resistivity

Sealing

Seal with one row of sealant tape, not less than 50 mm

Spacers

Support clips, steel reinforced polyamide Kalzip E-clips type E.180 with S10 spacer pads

Thermal insulation

Kalzip Insulation Quilt Type 2 - Manufactured with ECOSE™ Technology

External sheets

-

Material

Aluminium Standing Seam 65/400

Primary fasteners

6 mm diameter stainless steel torque controlled fasteners (SDK3-S-377-6.0x45)

System accessories

Not required

Extruded aluminium alloy (EN AW-6061) gable end hooks

Extruded aluminium alloy (EN AW-6063) drip angle 40 x 20 mm

Extruded aluminium alloy (EN AW-6063) flat bar 22 x 6 mm

Extruded aluminium alloy (EN AW-6063) gable end channel

Extruded aluminium alloy (EN AW-6063) tolerance gable clip extrusion

Fabricated aluminium alloy (EN AW-3004) flashings

Material and finish as per cladding sheets or as per project requirements - consult manufacturer for details.

Fabricated aluminium alloy (EN AW-3004) ridge closures (KZ 65/400)

Fabricated welded soaker units

Material and finish as per cladding sheets or as per project requirements - consult manufacturer for details.

Kalzip profile eaves fillers (KZ 65/400)

Kalzip profile ridge fillers (KZ 65/400)

Thermal transmittance (U-Value)

0.18 W/m²K

Pitch

1.5° (minimum)

Bearing width

58 mm (minimum)

Profile fillers

-

Type

Kalzip profiled fillers

Thickness

30 mm minimum. Consult manufacturer and insert requirements.

Finish

Aluminium, AluPlusPatina

Aluminium, natural stucco embossed

Aluminium, with a PVDF paint coating

Aluminium, with an HPC paint coating

AluPlusZinc

Copper

Stainless steel

Standard product features

Colour:

To suit project requirements.

Features:

First fix liner installed to provide a weather cover for those working below.

Finish:

Many options available.

Material:

  • Kalzip profile: Aluminium alloy to BS EN AW 3004 (AlMn1Mg1), 0.2% proof stress (Rp0.2): 185 N/mm² (minimum). Ultimate tensile strength (Rm): 220 N/mm² (minimum).
  • Liner profile: Galvanized steel to BS EN 10326.
  • Thermal insulation: Mineral wool insulation, manufactured in accordance with BS EN 13162.
  • Profile fillers: Black closed cell cross-linked polyethylene with a minimum density of 30 kg/m³.

Shape:

To suit project requirements.

Size:

To suit project requirements.

Warranty description:

Standard ten years.

Recycled content:

100% recycled aluminium top sheet.

Recyclability:

Excellent.

Embodied carbon:

Refer to EPD certificate.

Red Listed materials:

None.

Country of origin:

Germany.

Environmental information

Embodied carbon

Refer to EPD certificate

Recyclability

Excellent

Recycled content

100% recycled aluminium top sheet

Literature
Third party certifications
  • 98/3481
Similar products from Kalzip Ltd