NBS Source
Isover RD Party Wall Roll

Isover RD Party Wall Roll

Saint-Gobain Insulation UK Third party certifications:
  • DoP

    DoP

    Certificate type

Acoustic insulation that can be considered for use in masonry cavity separating (party) wall constructions.

Jump to:
+44 (0) 1473 822093 insulation-uk.com

Application

  • Walls - Party Wall Insulation - Masonry Cavity Separating Walls

Description

RD Party Wall Roll is a glass mineral wool roll that can be used to reduce the passage of sound across a masonry cavity separating (party) wall and minimise air movement within the cavity, improving its thermal performance.


When used as part of Robust Detail separating wall constructions E-WM-17, E-WM-20 & E-WM-24, it removes the need for costly pre-completion sound testing and can achieve +5dB over acoustic performance requirements set out in Building Regulations Approved Document E (England & Wales). Rolls are ready-cut to 2 x 455mm to fit between standard wall tie spacing.


Product Features

  • Proprietary component of Robust Detail Constructions E-WM-17, E-WM-20, E-WM-24 (England & Wales) and V-WM-20 (Scotland)
  • Meets the generic full-fill mineral wool specification required by many masonry separating (party) wall Robust Details
  • Can be also used in PCT (pre-completion testing) masonry party wall constructions
  • Manufactured from up to 75% recycled glass
  • Achieves a Eurofins Gold certification, the highest accreditation for indoor air quality
  • Achieves an A+ generic rating within the BRE Global Green Guide


Fire Classification

Euroclass A1 Reaction to Fire classification according to EN 13501-1.


Product Benefits

  • Thermal Bypass Solution - Can achieve a zero U-value for party walls, as defined in Building Regulations (Approved Document L1A, Table 3), when fully filling the party wall cavity and in combination with mineral wool filled cavity barriers at the edges of the cavity.
  • Excellent Acoustic Performance - Helps reduce unwanted noise between attached properties when used as part of a Robust Detail construction.
  • Sustainability - Achieves a BRE Green Guide rating of A+ which can assist in demonstrating environmental performance in your BREEAM assessments. Manufactured from up to 75% recycled glass on a plant that uses 100% renewable electricity. For further details visit insulation-uk.com/CSR
  • Robust Detail Compliant - Proprietary component of three Robust Detail constructions (E-WM-17, E-WM-20 & E-WM-24) and conforms to the generic full-fill mineral wool specification.
  • Saves Time and Cost - When used as part of a Robust Detail construction, it removes the need for costly pre-completion sound testing, making it a more cost effective solution to implement.
  • Fire Classification - Achieves a Euroclass A1 Reaction to Fire classification, according to EN 13501-1.


Key Considerations

When using ISOVER RD Party Wall Roll, you need to satisfy yourself that use of the product meets all relevant national Building Regulations and guidance as well as local, national and other applicable standards relevant for your construction or application, including requirements in relation to fire and applicable height restrictions.


Please refer to the following product documents:

  • Product Datasheet
  • Declaration of Performance
  • Safe Use Instruction Sheet

General information

Color

Yellow

Material

Mineral wool

Glass

Size

x 2

Width

455 mm

Uniclass

Pr_25_57_06_30 Flexible glass wool mat insulationPrimary

CAWS

F30/10 Full fill cavity insulation

F30/150 Full fill cavity insulation

Specification data - Flexible glass wool mat insulation Enhanced data

General requirements

Insulation products generally

Standard

To EN 13162.

Thermal conductivity at 10°C (maximum)

ISOVER RD Party Wall Roll has a declared thermal conductivity of 0.036 W/m.K under BS EN 13162: Thermal insulation products for buildings. Factory made mineral wool (MW) products.

0.036 W/m.K.

Thickness (minimum)

75 mm.

100 mm.

125 mm.

150 mm.

Density

Manufacturer's standard.

Consult manufacturer for details.

Fire performance

Euroclass A1 Reaction to Fire classification according to EN 13501-1.

Recycled content

Up to 75%.

Product Reference

ISOVER RD Party Wall Roll

Handling

Information regarding storage, installation and handling of ISOVER products, or health and safety information, can be found on the manufacturer's website.

Manufacturer's standard.

Third party product certification

BES 6001 Rating “Good”; BRE Global Green Guide Rating A+; ISO 14001; ISO 9001.

BRE statements:

ISOVER RD Party Wall Roll corresponds to the BRE Global Green Guide online generic specification ref 815320002 which achieves a summary rating of A+ within Domestic, Health, Industrial, Commercial, Retail, Education categories.


Environmental:


  • All ISOVER products are manufactured under Environmental Management System – ISO 14001.
  • Zero Ozone Depletion Potential (ODP) and Global Warming Potential (GWP) <5.
  • The manufacturing process does not use or contain CFCs, HCFCs or other damaging gases.
  • BES 6001 Rating “Good” - The Framework Standard for Responsible Sourcing.


Quality:


  • All ISOVER products are manufactured under Quality Management Standard – ISO 9001.
  • ISOVER RD Party Wall Roll is manufactured in accordance with BS EN 13162: Thermal insulation products for buildings. Factory made mineral wool (MW) products.


Environmental information

Recycled content

ISOVER RD Party Wall Roll is manufactured from up to 75% recycled glass

75 %

Third party certifications

DoP

Declaration of Performance (DoP): Isover RD Party Wall Roll & Timber Frame Party Wall Roll

Similar products from Saint-Gobain Insulation UK

Isover Cladding Roll 37

Isover Cladding Roll 37

Isover Cladding Roll 40

Isover Cladding Roll 40

Isover Spacesaver

Isover Spacesaver

Isover Spacesaver Lite

Isover Spacesaver Lite

Isover Spacesaver Plus

Isover Spacesaver Plus

Isover Spacesaver Ready-Cut

Isover Spacesaver Ready-Cut

Isover Timber Frame Batt 32

Isover Timber Frame Batt 32