Two component epoxy anticorrosive primer pigmented with zinc phosphate.
For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anticorrosive coatings systems for use in the offshore, petrochemical, chemical, pulp, paper and bridge industries.
The fast drying and handling properties, together with extended overcoatability, make this an excellent primer for factory application prior to full system application on site. Intergard 251 provides good abrasion resistance which minimizes mechanical damage in transit between the factory and site. Not designed for continuous water immersion.
G10/630 Galvanizing plus site-applied
G10/635 Thermally sprayed zinc coating plus site-applied
G10/638 Shop priming
G10/640 Shop painting
G10/643 Protective painting
G10/65 Shop priming for
G10/650 Site painting
G10/660 Shop plus site painting
G12/20 Shop priming
G12/330 Proprietary metal members
G12/650 Shop priming
Intergard 251 is designed for application to correctly prepared steel. However, it is also possible to apply over approved prefabrication primers, Further details of these can be obtained from International Protective Coatings. The following primers are recommended for Intergard 251:
The following topcoats are recommended for Intergard 251:
Alternative topcoats are also available, consult International Protective Coatings.