NBS Source
List your products
Interfine® 878
Application

It is a tough, hard wearing finish coat for application over properly primed surfaces which exhibits good flexibility, abrasion resistance and affords protection against spills and splashes of a range of chemicals such as acids, alkalis, solvents and salt solutions. Suitable for application in both factory new construction and site maintenance applications and is an ideal solution where legislation prevents the use of isocyanates, or restricts solvent emission levels.

For use in market sectors where high standards of cosmetic appearance and aesthetics are a key requirement. These include high performance steel constructions such as sports stadia, bridges, offshore platforms, FPSO vessels, tank farms, chemical and petrochemical plants, pulp and paper mills, and the power industry, in addition to general industrial and commercial steelwork where aesthetics are important. Not recommended for use in continuous immersion conditions.

Description

Offers compliance to current VOC legislation and affords extended lifetime to first maintenance when utilized as part of a high performance anticorrosive system. Interfine 878 offers superior gloss and colour retention and provides significantly improved resistance to yellowing and chalking when compared to typical conventional topcoats including catalysed acrylic and polyurethane finishes.

Applications:

It is a tough, hard wearing finish coat for application over properly primed surfaces which exhibits good flexibility, abrasion resistance and affords protection against spills and splashes of a range of chemicals such as acids, alkalis, solvents and salt solutions. Suitable for application in both factory new construction and site maintenance applications and is an ideal solution where legislation prevents the use of isocyanates, or restricts solvent emission levels.

For use in market sectors where high standards of cosmetic appearance and aesthetics are a key requirement. These include high performance steel constructions such as sports stadia, bridges, offshore platforms, FPSO vessels, tank farms, chemical and petrochemical plants, pulp and paper mills, and the power industry, in addition to general industrial and commercial steelwork where aesthetics are important. Not recommended for use in continuous immersion conditions.

General information

Uniclass 2015

Pr_35_31_68_66 Powder coatingsPrimary

CAWS

G10/630 Galvanizing plus site-applied

G10/635 Thermally sprayed zinc coating plus site-applied

G10/638 Shop priming

G10/640 Shop painting

G10/643 Protective painting

G10/65 Shop priming for

G10/650 Site painting

G10/660 Shop plus site painting

G12/20 Shop priming

G12/30 Proprietary

G12/330 Proprietary metal members

G12/650 Shop priming

Specification data - Powder coatings

Product Reference

Interfine® 878

Colour

A wide range is available; consult manufacturer's literature and insert requirements.

Product Options

Technical data:

  • Gloss level: High gloss.
  • Typical thickness: 50–75 microns dry; 69–104 microns wet.

Compatibility:

Interfine 878 can be applied over a limited range of intermediates:

  • Intercure 200.
  • Intercure 200HS.
  • Intergard 475HS.
  • Interplus 356.
  • Interseal 670HS.
  • Interzone 505.
  • Interzone 954.

For other suitable primers/ intermediates, consult International Protective Coatings.

Similar products from International®, brand of AkzoNobel