Intercure® 200
A two component epoxy zinc phosphate/ micaceous iron oxide primer.
As a primer for steelwork intended for use in a wide range of aggressive environments, including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. Suitable for overcoating within three hours in most climatic conditions, hence speeding up production and throughput in fabrication shops. Can also be used on site as a rapid curing, maintenance coating. Intercure 200 can also be used as a primer for substrates other than blasted steel, e.g. stainless steel, alloys etc. Consult International Protective Coatings for further details.
Intercure 200 is not intended for use as a primer for steelwork which may be subjected to immersion conditions.
Formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.
Applications:
As a primer for steelwork intended for use in a wide range of aggressive environments, including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges. Suitable for overcoating within three hours in most climatic conditions, hence speeding up production and throughput in fabrication shops. Can also be used on site as a rapid curing, maintenance coating. Intercure 200 can also be used as a primer for substrates other than blasted steel, e.g. stainless steel, alloys etc. Consult International Protective Coatings for further details.
Intercure 200 is not intended for use as a primer for steelwork which may be subjected to immersion conditions.
Uniclass 2015 | |
CAWS | G10/630 Galvanizing plus site-applied G10/635 Thermally sprayed zinc coating plus site-applied G10/638 Shop priming G10/640 Shop painting G10/643 Protective painting G10/65 Shop priming for G10/650 Site painting G10/660 Shop plus site painting G12/20 Shop priming G12/30 Proprietary G12/330 Proprietary metal members G12/650 Shop priming |
Product Reference | Intercure® 200 |
Colour | Limited colour range available; consult manufacturer and insert details. |
Product Options | Technical data:
Compatibility: Intercure 200 will normally be applied to suitably prepared steel, e.g. blast cleaned. However, if necessary, application over prefabrication blast primers can be performed. Consult InternationalProtective Coatings for further details. The following primers are recommended for Intercure 200:
The following topcoats/ intermediates are recommended for Intercure 200:
For other suitable topcoats/intermediates, consult International Protective Coatings. |