NBS Source
I'm a manufacturer

Application

Specifically designed to be spray-applied to the surface of freshly installed repair mortars, fairing coatings and cementitious coatings to retain moisture and assist cure. Intercrete 4870 should always be applied directly over freshly installed Intercrete repair and protection systems. It is recommended that application should be done as soon as practically possible after the final layer of the repair and protection system is in place. Typically, this can be done after as little as 15 minutes.


Intercrete 4870 is normally applied as the final layer of an Intercrete repair and protection system.

Description

Features and benefits:

  • A practical alternative to conventional methods such as polythene sheeting or damp hessian.
  • May also be used as a sealer coat for concrete.
  • Colourless, matt finish.


Where there is a requirement for resistance to highly aggressive chemicals contact International Protective Coatings for specific recommendations.

General information

Color

Clear

Finish

Matt

Material

Acrylic

Uniclass

Pr_35_31_66_16 Concrete curing coatingsPrimary

CAWS

C42/310 Repair mortar

C42/320 Levelling/ smoothing coats

C42/340 Crack/ void sealing grouts

C42/345 Protective coatings for concrete

Specification data - Concrete curing coatings

Composition

Water-borne.

Colouring agent

None.

Execution

Applying curing coatings to concrete.

Product Reference

Intercrete® 4870

Dry film thickness

65 μm.

Guidance for specification option:

Microns dry.

Wet film thickness (minimum)

186 μm.

Guidance for specification option:

Microns wet.

Weight

5 kg.