Interchar® 2060
Verified by manufacturer 4 months ago
A single component, borate free, high solids, low VOC intumescent coating designed to provide fire protection to structural steelwork.
Application
Suitable for both off-site and on-site application. Can be used over a wide range of approved priming systems. Interchar 2060 should always be applied over a recommended anti-corrosive coating scheme. It should be protected from pooling or running water and is not designed for frequent water immersion/ soaking.
Description
Features and benefits:
- Independently tested at accredited laboratories to BS 476-20, 21 and 22, and third party assessed and certified.
- VOC Content: 290 g/lt.
- Provides up to 60 minutes fire protection on 'I' section beams, columns and hollow sections.
General information
Color | White |
Finish | Matt |
Material | Acrylic Intumescent |
Uniclass | |
CAWS | M61/110 On-site coating to primed steel M61/115 On-site coating to galvanized steel M61/120 On-site coating to existing steel M61/140 On-site overcoating to existing steel M61/150 Off-site coating to unprimed steel M61/160 Off-site coating to primed steel M61/170 Off-site coating to galvanized steel |
Specification data - Intumescent protective coatings
Colour | White. |
Product Reference | Interchar® 2060 |
Wet film thickness (minimum) | 467–1000 μm. Guidance for specification option: Microns wet. |
Dry film thickness | 350–750 μm. Guidance for specification option: Microns dry. |
Primer | Intercure 200. Intercure 200HS. Intergard 251. Intergard 269. Interprime 306. |
Top coat | Intercryl 525. Interfine 878. Intersheen 54. Intersheen 579. Interthane 870. |
Similar products from International®, brand of AkzoNobel
Interchar® 1190
Interchar® 2090 - Acrylic Intumescent
Interchar® 212
Interchar® 3120