Compare

Favourite

Innova

Third party certifications:

QA Certificate
Certificate type

One part steel door frame for inward opening single swing doors in metal or timber stud internal walls.

Jump to:

Description

Steel section with single part frame, reveal lining and edge bead for single swing doors in gypsum board faced, metal or timber stud internal walls.

Features and benefits:

Plaster is feathered over perforated face to produce seamless appearance after painting.

Eliminates need for separate lining board or architrave.

Suitable for construction of jib doors.

Suitable for 30 minute fire-rated doors. Maximum door sizes apply.

Rapid, economic installation.

Durable edges.

Choice of size. Specials available.

Cold rolled, pre galvanized and annealed steel. Gauge: 0.86 mm. Coating: G90 (approximately equivalent to 90 g/m²).

Supplied by manufacturer cut to finished length, fitted with head joiner insert at corners, punched for hinges and strike plate.

Door width (maximum): 1000 mm.

Door height (maximum): 3000 mm.

General information

Material	Steel conforms to ASTM A653
Uniclass 2015	Pr_30_59_24_97 Wood doorsetsPrimary

Specification data - Wood doorsets

Product Reference	Selo Innova
Frame	Galvanized steel Standard, for site painting. Powder coated steel, RAL Special order, insert requirement. Minimum quantity may apply.
Door leaf	-
Construction/ finish	Timber, paint grade For site finishing. Timber, pre-painted Insert colour requirement. Timber, wood veneer Insert requirement. Timber, laminate Insert requirement.
Hinges	SS Standard Duty floor mounted pivot hinge Maintenance free top and bottom oil impregnated bronze bearings. Standard duty for doors weighing up to 80 kg. SS Heavy Duty floor mounted pivot hinge Maintenance free top and bottom oil impregnated bronze bearings. Standard duty for doors weighing up to 120 kg.
Vision panel	Not required Required Consult manufacturer for options and insert type and size.
Skirting	Not required Flush Insert size requirement. Surface-mounted Insert size requirement.
FSC certified	Not required Required
FireRating	Non fire-rated FD30
AcousticRating	29 dB 34 dB
Strike plate	As schedule Stainless steel Standard.

Standard product features

Material:
Steel conforms to ASTM A653.
Door leaf thickness:
54 mm.
Fire resistance:
Single leaf doors only: 30 minutes integrity and insulation to BS 476-22.
Maximum door sizes may apply; consult manufacturer for details.
Third party assessment may support applications in addition to those tested; consult manufacturer for details.
Installation:
Screw frame through perforated face to edge studs at (maximum) 200 mm centres. Double screw at ends and hinge points. Plasterers jointing tape to be applied to top corners before plastering/ jointing.
Wall thickness:
For use on walls with a thickness of 75–310 mm.

Product Options

Door leaf:
Width (maximum): 1000 mm.
Height (maximum): 3000 mm.

Literature

Selo Concealed Frame Doorsets Brochure

Third party certifications

BM Trada Exova: Certificate: RF11010
BM Trada Exova: Certificate: Z13010 (Acoustic)

Innova

Steel conforms to ASTM A653

Selo Innova

Galvanized steel

Powder coated steel, RAL

Timber, paint grade

Timber, pre-painted

Timber, wood veneer

Timber, laminate

SS Standard Duty floor mounted pivot hinge

SS Heavy Duty floor mounted pivot hinge

Not required

Required

Not required

Flush

Surface-mounted

Not required

Required

Non fire-rated

FD30

29 dB

34 dB

As schedule

Stainless steel

Door leaf:Width (maximum): 1000 mm.Height (maximum): 3000 mm.

Door leaf:
Width (maximum): 1000 mm.
Height (maximum): 3000 mm.