NBS Source
List your products


Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type


One part steel door frame for inward opening single swing doors in metal or timber stud internal walls.

Jump to:
+44 (0)203 8800339 www.selo-uk.com

Steel section with single part frame, reveal lining and edge bead for single swing doors in gypsum board faced, metal or timber stud internal walls.

Features and benefits:

  • Plaster is feathered over perforated face to produce seamless appearance after painting.
  • Eliminates need for separate lining board or architrave.
  • Suitable for construction of jib doors.
  • Suitable for 30 minute fire-rated doors. Maximum door sizes apply.
  • Rapid, economic installation.
  • Durable edges.
  • Choice of size. Specials available.
  • Cold rolled, pre galvanized and annealed steel. Gauge: 0.86 mm. Coating: G90 (approximately equivalent to 90 g/m²).
  • Supplied by manufacturer cut to finished length, fitted with head joiner insert at corners, punched for hinges and strike plate.
  • Door width (maximum): 1000 mm.
  • Door height (maximum): 3000 mm.

General information


Steel conforms to ASTM A653

Uniclass 2015

Pr_30_59_24_97 Wood doorsetsPrimary


L20/480 Doorsets

L20/55 Doorsets

Specification data - Wood doorsets

Product Reference

Selo Innova


Galvanized steel

Standard, for site painting.

Powder coated steel, RAL

Special order, insert requirement. Minimum quantity may apply.

Door leaf


Construction/ finish

Timber, paint grade

For site finishing.

Timber, pre-painted

Insert colour requirement.

Timber, wood veneer

Insert requirement.

Timber, laminate

Insert requirement.


SS Standard Duty floor mounted pivot hinge

Maintenance free top and bottom oil impregnated bronze bearings. Standard duty for doors weighing up to 80 kg.

SS Heavy Duty floor mounted pivot hinge

Maintenance free top and bottom oil impregnated bronze bearings. Standard duty for doors weighing up to 120 kg.

Vision panel

Not required


Consult manufacturer for options and insert type and size.


Not required


Insert size requirement.


Insert size requirement.

FSC certified

Not required



Non fire-rated



29 dB

34 dB

Strike plate

As schedule

Stainless steel


Standard product features


Steel conforms to ASTM A653.

Door leaf thickness:

54 mm.

Fire resistance:

  • Single leaf doors only: 30 minutes integrity and insulation to BS 476-22.
  • Maximum door sizes may apply; consult manufacturer for details.
  • Third party assessment may support applications in addition to those tested; consult manufacturer for details.


Screw frame through perforated face to edge studs at (maximum) 200 mm centres. Double screw at ends and hinge points. Plasterers jointing tape to be applied to top corners before plastering/ jointing.

Wall thickness:

For use on walls with a thickness of 75–310 mm.

Product Options

Door leaf:

  • Width (maximum): 1000 mm.
  • Height (maximum): 3000 mm.

Third party certifications
  • BM Trada Exova: Certificate: RF11010
  • BM Trada Exova: Certificate: Z13010 (Acoustic)
Similar products from SELO