IM Fleece Tape: Window and Door airtight tape - Airtight Window & Doors Sealing Tapes
Verified by manufacturer 1 day ago
The very best airtightness tape for windows and connecting joints. Polyamide film covered on one side with non-woven for outside and inside sealing of window connection joints with adhesive coating.
Application
Product Application – Airtight Tape
Install in accordance with the manufacturer’s written instructions to maintain continuity of the airtight and vapour control layer.
The tape shall be installed to create a durable, flexible and permanent seal at junctions, overlaps and penetrations within the building envelope.
Suitable Applications
- Window and door perimeter sealing
- Floor-to-wall junctions
- Wall-to-ceiling junctions
- Membrane overlaps
- Airtight detailing at service penetrations
- Connections between dissimilar substrates
Substrate Preparation
Substrates shall be:
- Clean and dust-free
- Dry and free from grease or release agents
- Structurally sound and stable
Loose particles shall be removed prior to installation.
Highly porous or friable substrates should be consolidated where required.
Installation Method
- Cut tape to required length prior to application
- Remove release liner gradually during installation
- Apply firmly to substrate ensuring full surface contact
- Use pressure roller or hand pressure to ensure strong adhesion
- Avoid creases, folds or trapped air
At corners and junctions, ensure adequate overlap to maintain airtight continuity.
Plastering and Finishing
The fleece-backed surface is suitable for plastering, skimming or painting once installed.
Ensure plaster systems fully encapsulate the fleece layer where required by specification.
Performance Requirements
The completed installation shall:
- Maintain continuous airtightness
- Prevent air leakage at junctions and interfaces
- Integrate fully with adjacent membranes and coatings
- Remain durable under normal building movement
Description
Intelligent Membranes Airtight Tape – Fleece-Backed Airtight & Vapour Control Tape
Product Description
Intelligent Membranes Airtight Tape is a premium, fleece-backed sealing tape engineered to provide durable airtightness and vapour control at critical junctions, penetrations and changes in building materials. It is designed for use in high-performance building envelopes where reliable continuity of the airtight layer is required.
The tape features a reinforced fleece surface bonded to a high-performance adhesive layer, enabling strong adhesion to common building substrates, including timber, concrete, brick, rigid membranes and vapour control layers. Once installed, the non-woven fleece backing can be plastered, painted or skimmed over, integrating seamlessly into the building fabric and remaining visually discreet while maintaining performance.
Intelligent Membranes Airtight Tape is suitable for both new build and retrofit projects and is an essential component of continuous airtightness systems, supporting design targets for energy efficiency, comfort and durability.
Key Features and Benefits
- Premium fleece-backed construction for enhanced plaster and paint adhesion.
- Strong adhesion to timber, brick, concrete and compatible membrane substrates.
- Flexible and durable, suitable for corners, junctions and penetrations.
- Weather resistant for long-term performance both internally and externally.
- Supports airtightness targets for low-energy, Passivhaus and high-performance builds.
- Plasterable and paintable finish for architectural integration.
Typical Applications
- Airtight sealing of window and door perimeter junctions.
- Floor-to-wall, wall-to-ceiling and wall-to-wall junctions.
- Airtight detailing at service penetrations.
- Sealing overlaps in vapour control layers and membranes.
- Integration into airtight systems to achieve continuous barrier performance.
Key Attributes
- Available in multiple widths (e.g., 75 mm, 100 mm, 150 mm, 200 mm) with 25 m lengths.
- Fleece backing with high adhesive strength.
- Flexible for use on irregular surfaces.
- Designed for both internal and external airtight detailing.
General information
Color | White Other |
Finish | Coated Guidance for specification option: Adhesive coating. |
Material | Fleece Polyamide |
Shape | Rectangle Other |
Length | 25000 mm |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | L10/75 Sealant joints L10/810 Sealant joints |
Product range |
Specification data - Polymer-based adhesive sealant tapes
Classification data | |
Material | Polyamide. |
Bond | Single-sided modified HMPSA adhesive. |
Properties | |
Reaction to fire | To DIN EN 13501, Class E. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0%. |
Air permeability | To DIN EN 12114 (a-value): <0.1 m³. |
Size | 75 mm wide. 100 mm wide. 150 mm wide. 200 mm wide. |
Colour | White. Other. Guidance for specification option: Other colours available upon request, consult manufacturer. |
Overall thickness | 0.31 mm. Guidance for specification option: (no adhesive). |
Elongation at break | To DIN EN ISO 527-3, Longitudinal: 135%; Lateral: 206%. |
Breaking load | To DIN EN ISO 527-3, Longitudinal: 59 N/ 15 mm; Lateral: 45 N/ 15 mm. |
Sd value | To DIN EN ISO 12572, 0.14–26.8 m. |
Application temperature | -22° C to +60° C. |
Sustainability data
Contains Red List materials | No |
Country of material origin | Europe |
Country of product manufacture | Europe |
Material | Fleece Polyamide |
Recyclability | Not recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Expected Life | 25 year |
BIM objects
This BIM object has been authored to meet the requirements of the
Find out more about the
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |
Literature
Literature type
Intelligent Membranes Airtight Fleece Tape Install Guide
Intelligent Membranes Airtight Fleece Tape Product Sheet