NBS Source
I'm a manufacturer

Application

For the airtight bonding of overlaps in illbruck vapour barrier and membranes for interior use. Can also be used to seal joints in OSB boards and as an air-seal tape for penetrations.

Description

A reinforced, single-sided, kraft paper tape with modified acrylate dispersion, solvent-free adhesive. Primers AT140 or ME901 are recommended on porous or damp substrates or at low temperatures.


Usually primerless adhesion to most common substrates which should be dry, grease , dust and debris free. Consolidate the bond by applying pressure with a stout seam roller by rolling over the top of the tape where there is a solid surface underneath. 


Features and benefits:

  • Fully compatible with all internal illbruck building protection products.
  • Strong kraft paper.
  • Easy to tear off by hand.
  • Quick and easy application.


For Technical Data Sheets and Safety Data Sheets, please refer to the illbruck website Download Centre.

General information

Color

Yellow

Length

40000 mm

Width

60 mm

Warranty description

-

Manufacturer guidance

Any product which has been applied (a) in accordance with Tremco CPG UK Ltd written instructions and (b) in any applications recommended by Tremco CPG UK Ltd, but which is proved to be defective, will be replaced free of charge.

Uniclass

Pr_35_90_87_69 Polymer-based adhesive sealant tapesPrimary

CAWS

H92/780 Air and vapour control layer

H92/785 Breather membrane

P10/310 Air and vapour control layer

P10/320 Breather membrane

P10/60 Air and vapour control layer

P10/65 Breather membrane

Product range

High Performance Sealing & Bonding Tape

Specification data - Polymer-based adhesive sealant tapes

Material

Reinforced kraft paper with solvent-free modified acrylate dispersion adhesive.

Colour

Yellow.

Service temperature

-40 to +100°C.

Application temperature

5–40°C.

Roll size

40 000 x 60 mm.

Execution

-

Manufacturer guidance

As per manufacturers' Technical Data Sheet. Primer AT140 is required when applying to concrete floor and soffit slabs. Apply the tape wrinkle and bubble free, do not stretch the tape when applying. Apply in pre-cut short over lapping sections or continuously direct from the roll.

Similar products from illbruck – a brand of Tremco CPG UK Ltd

FR Sealing & Joining Tape A2 (ME355) - Sealing and Joining Tape

illbruck ME315 Total Protection Tape

illbruck ME315 Total Protection Tape

illbruck ME316 Endurance Tape

illbruck ME316 Endurance Tape

illbruck ME322 Internal Tape 100

illbruck ME322 Internal Tape 100