illbruck ME315 Total Protection Tape
Verified by manufacturer 22 days ago
EC1plus
Certificate type
A purpose made proprietary internal and external sealing tape.
Application
Sealing of the overlapping and perimeter joints of breather membranes, vapour barrier membranes. May also be used as a standalone sealing tape between sheathing board horizontal and vertical butt joints and at the interface with the board and slab edge.
Description
A proprietary single-sided adhesive tape for interior and exterior use, providing a high-performance air and weather-tight seal to linear joints between membranes and other types of narrow construction joints.
Usually primerless adhesion to most common substrates which should be dry, grease , dust and debris free. Consolidate the bond by applying pressure with a stout seam roller by rolling over the top of the tape where there is a solid surface underneath.
Features and benefits:
- For interior and exterior use.
- Quick and easy application.
- Highly UV-resistant.
- Can be used within partially open facades.
- Weather-resistant.
- Highly moisture resistant adhesive.
- Excellent adhesive bond strength to most common substrates.
- Very soft to touch.
For Technical Data Sheets and Safety Data Sheets, please refer to the illbruck website Download Centre.
General information
Color | Black Silver |
Finish | Gloss |
Material | Polyethylene |
Shape | Rectangle |
Length | 25000 mm |
Width | 150 mm 100 mm 50 mm |
Height | 0.3 mm |
Warranty description | Manufacturer guidanceAny product which has been applied (a) in accordance with Tremco CPG UK Ltd written instructions and (b) in any applications recommended by Tremco CPG UK Ltd, but which is proved to be defective, will be replaced free of charge. |
Uniclass | |
CAWS | H92/780 Air and vapour control layer H92/785 Breather membrane P10/60 Air and vapour control layer P10/310 Air and vapour control layer P10/320 Breather membrane P10/65 Breather membrane |
Product range |
Specification data - Polymer-based adhesive sealant tapes
Material | Polyethylene foil. |
Bond | Acrylic dispersion adhesive. |
Fire performance | |
Reaction to fire | To BS EN 13501-1, Class E.Guidance for specification option: (Exempt from the requirements of Approved Document B, Part B4 Regulation 7. ME315 is classed as a seal or sealing tape up to a maximum width of 150 mm). |
Air permeability | To DIN EN 12114, <0.1m³/m².hr @ 600Pa. |
Colour | Gloss black/ silver. |
Width | 50 mm. 100 mm. 150 mm. |
UV resistance | 12 months full exposure. Guidance for specification option: Permanent in facades with louvres up 35 mm or no more than 50% of surface area. |
Application temperature | -10 to +40°C. |
Service temperature | -40 to +100°C. |
Bonding | To BS EN 1939, 35 N/25 mm. Guidance for specification option: Approximate, dependent on ambient temperature and RH. |
Execution | Manufacturer guidanceAs per manufacturers' Technical Data Sheet. Primer AT140 is required when bridging over known barriers to adhesion such as over-applied and smeared Fire Rated Silicone based sealants applied between horizontal and vertical butt joints in sheathing boards and at the head & foot of sheathing boards at the slab edge interface. Apply the tape wrinkle and bubble free, do not stretch the tape when applying. Apply in pre-cut short over lapping sections or continuously dierct from the roll. |
Third party certifications
EC1plus
ME315 EC1 Plus Certificate