Verified by manufacturer 25 days ago
VE4-200-STST (200 mm)
BBA Agrément Certificate
Certificate type
ISO 9001 Quality Management
Certificate type
BBA approved, stainless steel light duty wall tie used in domestic dwellings. Suitable for buildings with a maximum height of 10 m and cavity widths from 50–150 mm. (Type 4 Wall Tie)
Suitable for use in domestic dwellings. Suitable for buildings with a maximum height of 10 m and cavity widths of 50–150 mm.
The UK's only BBA approved stainless steel wire Type 4 housing wall tie.
For securing two leaves of a cavity wall to each other, allowing them to act as one structurally.
The VE4 comes in two styles. The first has a multi-drip in the middle of the tie, while the second has two offset double drips
placed apart. This second style is intended for walls with larger cavities ensuring the drip sits in the clear cavity. The double-drip
style is only available for the 275mm tie. Both designs allow
them to be installed in either orientation.
Features and benefits:
Color | Silver |
Material | Stainless steel Guidance for specification option: Grade 304. |
Length | 200 mm 225 mm 250 mm 275 mm |
Uniclass | |
CAWS | F30/25 Cavity wall ties used with partial fill insulation F30/215 Cavity wall ties used with partial fill insulation F30/220 Wall ties F30/26 Wall ties F30/24 Cavity wall ties F30/214 Cavity wall ties |
Standard | To BS EN 845-1. |
Tie type | PD 6697 Type 4 (Masonry – light duty).Guidance for specification option: A light-duty wall tie used in domestic dwellings. Suitable for buildings with a maximum height of 10 m and numerous cavity widths from 50 to 150 mm. Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. |
Material | Grade 304 stainless steel. |
Length | 200 mm.Guidance for specification option: Supplied in boxes of 250 or bags of 50. |
End types | Manufacturer's standard.Guidance for specification option: Consult manufacturer for details. |
Design embedment length (minimum) | 62.5 mm. |
Movement | Manufacturer's standard. |
Additional requirements | |
Mortar joint thickness (minimum) | 10 mm. |
Resistance to water crossing cavity | Resistant (multidrip feature). |
Slope tolerance | Manufacturer's standard. |
Compressive load capacity | 557 N. |
Tensile load capacity | 1256 N. |
Dynamic stiffness | Type A. |
Tie-mounted insulation retaining clips | ECO-clips.Guidance for specification option: Universal 80 mm-diameter insulation clip made using less plastic for reduced environmental impact. Supplied in bags of 250 or 50. Not required. |
Third party accreditation | BBA 17/5462; UKCA marked. |
Cavity width | 50–75 mm. |
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Recyclability | Recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |