HouseBreathe
Vapour open membrane for timber frame construction.
- HouseBreathe should be fixed to frames with stainless steel nails or staples at 500 mm maximum centres and installed with 150 mm vertical laps and 100 mm horizontal laps. Vertical laps should be staggered.
- Stud locations should be marked on the face of the membrane with tape, to enable the securing of wall tie fixings.
A spun-bonded, polypropylene vapour open membrane for timber wall construction. HouseBreathe protects against wind-driven rain, snow and dust, while allowing the passage of water vapour from the building interior.
Application:
- HouseBreathe should be fixed to frames with stainless steel nails or staples at 500 mm maximum centres and installed with 150 mm vertical laps and 100 mm horizontal laps. Vertical laps should be staggered.
- Stud locations should be marked on the face of the membrane with tape, to enable the securing of wall tie fixings.
Certification:
Conforms to the requirements of W2 material in accordance with BS EN 13859-2:2010 and must be installed in accordance with its CE certificate and installation instructions.
Uniclass 2015 | |
CAWS | H20/10 Sheet cladding H20/150 Sheet cladding H20/155 Sheet cladding H21/10 Vertical timber weatherboarding H21/110 Vertical timber weatherboarding H21/111 Horizontal timber weatherboarding H21/115 Vertical timber weatherboarding H21/116 Horizontal timber weatherboarding H21/15 Horizontal timber weatherboarding H21/20 Breather membrane H30/10 Fibre cement H30/110 Fibre cement H92/120 Rainscreen cladding M30/265 Building paper P10/320 Breather membrane P10/65 Breather membrane |
Product Reference | HouseBreathe |
Width | 1.5 m50 m long. 1.35 m100 m long. 2.7 m100 m long. 3 m100 m long. |
Colour | Manufacturer's standardGrey as standard, consult manufacturer for other colours and insert requirements. |
Standard product features | Thickness: 0.4 mm. Weight: 100 g/m². Performance data:
|