Security Booth with 1500 mm semi-diameter base, and one set of motorised leaves. Available with selection of internal hights finishing and options. Metal Detector version available.
The HiSec 9 is a motorized security booth for internal or semi-external installation. It incorporates a transparent design, offering a choice of security levels which prevent tailgating and piggybacking.
The doors are always locked shut in the rest position. An authorized signal opens the first door, allowing the user to step into the booth where a presence is detected. When the first door is closed, the second door opens, thus allowing the user to pass through. The second door shuts after the unit has been vacated, which also resets the system.
The HiSec detects if more than one person is present inside the booth with an electronic ultrasound sensor. The booth is set with a predetermined but adjustable anti-hostage threshold. As an authorized user stands in the booth, it confirms acceptance of the occupant and authorises the door to close.
Should the measured volume presence not be authorized (when more than one person is present or there is non-permitted additional baggage), a vocal synthesizer will ask the occupants to leave the booth.
An additional left object sensor is able to detect the presence of an object on the floor (50 x 50 x 30 mm). It is equipped with an electronic safety feature which reverses the motor to re-open the door upon detection of an obstruction. The door fully opens to allow the obstruction to be removed, after which it attempts to re-close.
Features and benefits:
RAL 9006 and RAL 7040.
High strength laminate.
1000 x 1500 x 2320 mm
L20/490 Automatic doors
L20/495 Automatic revolving doors
Third party accreditation
Motorized full height security booth.
Materials and finishes
Printed frame in polyethylene terephthalate, RAL 7040.
Sliding door: to be used in conjunction with existing door.
Painted steel section powder coated finish, RAL 9006.
Standard: 11–12 mm 2-ply laminate safety glass.
BR2/S: 20–21 mm thick 2-ply laminated safety glass.
BR3/S: 26–27 mm 3-ply laminated safety glass.
BR4/S: 32–33 mm thick 3-ply laminated safety glass.
Activation and control system
The HiSec booth is equipped with an ultrasound system which determines if more than one person is present inside the booth.
Safety torque sensing.
Doors are always locked in rest position, anti-tailgating system, anti-hostage electronic ultrasound sensor to determine if more than one person is present in the booth, additional left object sensor.
Demountable version kit.
Glass security upgrade.
Available upon request; consult manufacturer for details.
Horizontal transportation kit.
Left object sensor.
HiSec Lite 9-L Full Height Security Booth with 900 mm Walkway
HiSec Lite 9-LM Full Height Security Booth with 900 mm Walkway
Concrete to 30 N/mm², 1650 x 1150 x 150 mm.
Internal light on ceiling.
Four passages per minute.
Proximity 'hands free' access reader.
Operating temperature range
-10 to +45°C.
90% RH without condensation.
115–230 V a.c.
Ingress protection (IP) rating
1.5 million cycles.
High pressure laminate (HPL), finished pearl grey.
High-strength laminate, finished plumb grey.