HFP Addressable Call Point with SCI (Red)

Model HCP-E(HFP)-SCI is a Manual Call Point with integral short-circuit isolator, which is fully compatible with Hochiki ESP analogue addressable protocol. The unit incorporates a bi-coloured LED, which can be selected as pulsing/non-pulsing for communications polling and is continuously lit when the HCP-E(SCI) is operated in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.

The unit operates by pressing the EN 54 compliant non-frangible (plastic) element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.

The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing.

The unit can be flush mounted as supplied.

Features and benefits:

• Fast response
• Integral short-circuit isolator
• Bi-coloured status LED
• Non-frangible element fitted as standard (conforms to EN54)
• Addressed with TCH-B200 Hand Held Programmer
• Surface or flush mounting (if surface mounting, requires SR MOUNTING BOX, sold separately)
• Different colour options available.
• LPCB Approved to EN 54.
• Low power mode: 180 μA (max), 100 μA (typ).
• Quiescent current: 350 μA (max), 250 μA (typ).
• Alarm current: 10.0 mA (max), 5 mA (typ).
• Resistance in positive: 100 mΩ when closed (maximum), 100 kΩ when open (minimum).
• Short circuit threshold (typical): 430 Ω.
• SIL Level 2 approved and ‘SMOKE VENT’ label printed variant available.